UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 20‑F

Ferroglobe PLC

(Exact name of Registrant as specified in its charter)

England and Wales

(Jurisdiction of incorporation or organization)

2nd Floor West Wing, Lansdowne House, 57 Berkeley Square

London W1J 6ER, United Kingdom

+44‑(0)203‑129‑2420

(Address of principal executive offices)

Phillip Murnane Chief Financial Officer and Principal Accounting Officer

2nd Floor West Wing, Lansdowne House, 57 Berkeley Square

London W1J 6ER, United Kingdom

+44‑(0)203‑129‑2420

(Name, Telephone, E-mail and/or Facsimile number and Address of Company Contact Person)

Securities registered or to be registered pursuant to Section 12(b) of the Act

Securities registered or to be registered pursuant to Section 12(g) of the Act.

None

Securities for which there is a reporting obligation pursuant to Section 15(d) of the Act.

None

Indicate the number of outstanding shares of each of the issuer’s classes of capital or common stock as of the close of the period covered by the annual report.

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☒

If this report is an annual or transition report, indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934. Yes ☐ No ☒

Note—Checking the box above will not relieve any registrant required to file reports pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934 from their obligations under those Sections.

Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes ☒ No ☐    

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” and “emerging growth company” in Rule 12b-2 of the Exchange Act:

If an emerging growth company that prepares its financial statements in accordance with U.S. GAAP, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards† provided pursuant to Section 13(a) of the Exchange Act. ☐

† The term “new or revised financial accounting standard” refers to any update issued by the Financial Accounting Standards Board to its Accounting Standards Codification after April 5, 2012

Indicate by check mark which basis of accounting the registrant has used to prepare the financial statements included in this filing:

If “Other” has been checked in response to the previous question, indicate by check mark which financial statement item the registrant has elected to follow.

Item 17 ☐ Item 18 ☐

If this is an annual report, indicate by check mark whether the registrant is a shell company (as defined in Rule 12b‑2 of the Exchange Act). Yes ☐ No ☒

TABLE OF CONTENTS

CAUTIONARY STATEMENTS REGARDING FORWARD-LOOKING STATEMENTS

This annual report includes statements that are, or may be deemed to be, forward-looking statements within the meaning of the securities laws of certain applicable jurisdictions. These forward-looking statements include, but are not limited to, all statements other than statements of historical facts contained in this annual report, including, without limitation, those regarding our future financial position and results of operations, our strategy, plans, objectives, goals and targets, future developments in the markets in which we operate or are seeking to operate or anticipated regulatory changes in the markets in which we operate or intend to operate. These statements are often, but not always, made through the use of words or phrases such as “believe,” “anticipate,” “could,” “may,” “would,” “should,” “intend,” “plan,” “potential,” “predict(s),” “will,” “expect(s),” “estimate(s),” “project(s),” “positioned,” “strategy,” “outlook,” “aim,” “assume,” “continue,” “forecast,” “guidance,” “projected,” “risk” and similar expressions.

By their nature, forward-looking statements involve risks and uncertainties because they relate to events and depend on circumstances that may or may not occur in the future. Forward-looking statements are not guarantees of future performance and are based on numerous assumptions. Our actual results of operations, financial condition and the development of events may differ materially from (and be more negative than) those made in, or suggested by, the forward-looking statements. Investors should read the section entitled “Item 3.D.—Key Information—Risk Factors” and the description of our segments in the section entitled “Item 4.B.—Information on the Company—Business Overview” for a more complete discussion of the factors that could affect us. All such forward-looking statements involve estimates and assumptions that are subject to risks, uncertainties and other factors that could cause actual results to differ materially from the results expressed in, or suggested by, the statements. Among the key factors that could cause actual results to differ materially from those projected in the forward-looking statements are the following:

These and other factors are more fully discussed in the “Item 3.D.—Key Information—Risk Factors” and “Item 4.B.—Information on the Company—Business Overview” sections and elsewhere in this annual report.

The risks set forth in “Item 3.D.—Key Information—Risk Factors” section are not exhaustive. Other sections of this annual report describe additional factors that could adversely affect our business, financial condition or results of operations. Moreover, we operate in a very competitive and rapidly changing commercial environment. New risk factors emerge from time to time and it is not possible for us to predict or list all such risks, nor can we assess the impact of all possible risks

on our business or the extent to which any factor, or combination of factors, may cause actual results to differ materially from those contained, or implied by, in any forward-looking statements.

The forward-looking statements made in this annual report relate only to events or information as of the date on which the statements are made in this annual report. Except as required by law, we undertake no obligation to update or revise publicly any forward-looking statements, whether as a result of new information, future events or otherwise, after the date on which the statements are made or to reflect the occurrence of unanticipated events. You should read this annual report and the documents we reference herein carefully and completely, with the understanding that our actual future results or performance may be materially different from what we anticipate.

CURRENCY PRESENTATION AND DEFINITIONS

In this annual report, references to “$,” “US$” and “U.S. Dollars” are to the lawful currency of the United States of America, references to “Euro” and “€” are to the single currency adopted by participating member states of the European Union relating to Economic and Monetary Union and references to “Pound Sterling” and “£” are to the lawful currency of the United Kingdom.

Unless otherwise specified or the context requires otherwise, all financial information for the Company provided in this annual report is denominated in U.S. Dollars.

Definitions

Unless otherwise specified or the context requires otherwise in this annual report:

PRESENTATION OF FINANCIAL INFORMATION

The selected financial information as of December 31, 2018 and December 31, 2017 and for the years ended December 31, 2018, 2017 and 2016 is derived from our Consolidated Financial Statements, which are included elsewhere in this annual report and which are prepared in accordance with IFRS. The selected financial information related to other periods is derived as noted in “Item 3.—Key Information Selected Financial Data”.

Certain numerical figures set out in this annual report, including financial data presented in millions or thousands and percentages describing market shares, have been subject to rounding adjustments, and, as a result, the totals of the data in this annual report may vary slightly from the actual arithmetic totals of such information. Percentages and amounts reflecting changes over time periods relating to financial and other data set forth in “Item 5.—Operating and Financial Review and Prospects” are calculated using the numerical data in our Consolidated Financial Statements or the tabular presentation of other data (subject to rounding) contained in this annual report, as applicable, and not using the numerical data in the narrative description thereof.

PART I

ITEM 1.       IDENTITY OF DIRECTORS, SENIOR MANAGEMENT AND ADVISERS

Not applicable.

ITEM 2.       OFFER STATISTICS AND EXPECTED TIMETABLE

Not applicable.

ITEM 3.       KEY INFORMATION

A.    Selected Financial Data

The following selected financial information as of December 31, 2018 and 2017 and for the years ended December 31, 2018, 2017 and 2016 is derived from our Consolidated Financial Statements, prepared in accordance with IFRS, which are included elsewhere in this annual report. The selected financial information as of December 31, 2015 reflect the consolidated statement of financial position of the Company as previously reported.

Ferroglobe was formed with the consummation of the Business Combination on December 23, 2015. FerroAtlántica is the Company’s “Predecessor” for accounting purposes. Therefore, the selected consolidated income statement of the Company for the year ended December 31, 2015 were composed of the following results:

The selected financial information as of and for the year ended December 31, 2014 corresponds to the Predecessor, FerroAtlántica.

The selected consolidated financial information as of and for the years ended December 31, 2018, 2017, 2016, 2015 and 2014 is not intended to be an indicator of our financial condition or results of operations in the future. The following tables should be read in conjunction with “Item 5.A.—Operating and Financial Review and Prospects—Operating Results,” and our Consolidated Financial Statements included elsewhere in this annual report.

Consolidated Income Statement Data

Earnings (loss) per share

Cash dividends declared

Consolidated Statement of Financial Position Data

B.    Capitalization and indebtedness.

Not applicable.

C.    Reasons for the offer and use of proceeds.

Not applicable.

D.    Risk factors.

An investment in our ordinary shares carries a significant degree of risk. You should carefully consider the following risks and all other information in this annual report, including our Consolidated Financial Statements. Additional risks and uncertainties we are not presently aware of, or that we currently deem immaterial, could also affect our business operations and financial condition. If any of these risks are realized, our business, results of operations and financial condition could be adversely affected to a material degree. As a result, the trading price of our ordinary shares could decline and you could lose part or all of your investment.

Risks Related to Our Business and Industry

Our operations depend on industries including the aluminum, steel, polysilicon, silicone and photovoltaic/solar industries, which, in turn, rely on several end‑markets. A downturn or change in these industries or end-markets could adversely affect our business, results of operations and financial condition.

Because we primarily sell the silicon metal, silicon‑based alloys, manganese‑based alloys and other specialty alloys we produce to manufacturers of aluminum, steel, polysilicon, silicones, and photovoltaic products, our results are significantly affected by the economic trends in the steel, aluminum, polysilicon, silicone and photovoltaic industries. Primary end users that drive demand for steel and aluminum include construction companies, shipbuilders, electric appliance and car manufacturers, and companies operating in the rail and maritime industries. Primary end users that drive demand for polysilicon and silicones include the automotive, chemical, photovoltaic, pharmaceutical, construction and consumer products industries. Demand for steel, aluminum, polysilicon and silicones from such companies is driven primarily by gross domestic product growth and is affected by global economic conditions. Fluctuations in steel and aluminum prices may occur due to sustained price shifts reflecting underlying global economic and geopolitical factors, changes in industry supply-demand balances, the substitution of one product for another in times of scarcity, and changes in national tariffs. An easing of demand for steel and aluminum can quickly cause a substantial build-up of steel and aluminum stocks, resulting in a decline in demand for silicon metal, silicon-based alloys, manganese-based alloys, and other specialty alloys. Polysilicon and silicone producers are subject to fluctuations in crude oil, platinum, methanol and natural gas prices, which could adversely affect their businesses. Changes in power regulations in different countries, fluctuations in the relative costs of different sources of energy, and supply-demand balances in the different parts of the value chain, among other factors, may significantly affect the growth prospects of the photovoltaic industry. A significant and prolonged downturn in the end‑markets for steel, aluminum, polysilicon, silicone and photovoltaic products, could adversely affect these industries and, in turn, our business, results of operations and financial condition.

The metals industry is cyclical and has been subject in the past to swings in market price and demand which could lead to volatility in our revenues.

Our business has historically been subject to fluctuations in the price of our products and market demand for them, caused by general and regional economic cycles, raw material and energy price fluctuations, competition and other factors. The timing, magnitude and duration of these cycles and the resulting price fluctuations are difficult to predict. For example, we experienced a weakened economic environment in national and international metals markets, including a sharp decrease in silicon metal prices in all major markets, from late 2014 to late 2017. During the second half of 2018, we experienced a fast and unexpected decline in the prices of products which adversely affected our results.

Historically, our subsidiary Globe Metallurgical Inc., has been affected by recessionary conditions in the end‑markets for its products, such as the automotive and construction industries. In April 2003, Globe Metallurgical Inc. sought protection under Chapter 11 of the U.S. Bankruptcy Code following its inability to restructure or refinance its indebtedness amidst a confluence of several negative economic and other factors, including an influx of low‑priced, dumped imports, which caused it to default on then‑outstanding indebtedness. A recurrence of such economic factors could have a material adverse effect on our business, results of operations and financial condition.

Additionally, as a result of unfavorable conditions in the end‑markets for its products, Globe Metales S.R.L. (“Globe Metales”) became subject to reorganization proceedings (“concurso preventivo”) in 1999, which ended in February 2019. While such reorganization proceedings were ongoing (until February 2019), Globe Metales could not dispose of or encumber its registered assets (including its real estate) or perform any action outside its ordinary course of business without prior court approval.

In calendar years 2009 and 2016, the global silicon metal, manganese and silicon based alloys industries suffered from unfavorable market conditions. We have also observed a deterioration of market conditions for several of our products in the second half of 2018 and the beginning of 2019 and these conditions may continue in the near future. Any decline in the global silicon metal, manganese and silicon based alloys industries could have a material adverse effect on our business, results of operations and financial condition. In addition, our business is directly related to the production levels of our

customers, whose businesses are dependent on highly cyclical markets, such as the automotive, residential and non‑residential construction, consumer durables, polysilicon, steel, and chemical industries. In response to unfavorable market conditions, customers may request delays in contract shipment dates or other contract modifications. If we grant modifications, these could adversely affect our anticipated revenues and results of operations. Also, many of our products are traded internationally at prices that are significantly affected by worldwide supply and demand. Consequently, our financial performance will fluctuate with the general economic cycle, which could have a material adverse effect on our business, results of operations and financial condition.

Our business is particularly sensitive to increases in energy costs, which could materially increase our cost of production.

Electricity is one of our largest production components. The price of electricity is determined in the applicable domestic jurisdiction and is influenced both by supply and demand dynamics and by domestic regulations. Changes in local energy policy, increased costs due to scarcity of energy supply, climate conditions, the termination or non-renewal of any of our power purchase contracts and other factors may affect the price of electricity supplied to our plants and adversely affect our results of operations and financial conditions.

Because electricity is indispensable to our operations and accounts for a high percentage of our production costs, we are particularly vulnerable to supply limitations and cost fluctuations in energy markets. For example, at our Spanish, Argentine, South African and Chinese plants, production must be modulated to reduce consumption of energy in peak hours or in seasons with higher energy prices, in order for us to maintain profitability. Our Venezuelan operations depend on national hydraulic energy production (rainfall) to produce sufficient power to provide a reliable source of supply, which is not always possible. Generation of electricity in Spain and France by our own hydroelectric power operations partially mitigates our exposure to price increases in those two markets. However, we have pursued in the past the possibility of disposing of those operations, and may do so in the future. Such a divestiture, if completed, would result in a greater exposure to increases in electricity prices.

Electrical power to our U.S. and Canada facilities is supplied mostly by American Electric Power Co., Alabama Power Co., Brookfield Renewable Partners L.P., Hydro-Québec, the Tennessee Valley Authority, and Niagara Mohawk Power Corporation through dedicated lines. Our Alloy, West Virginia facility obtains approximately 45% of its power needs under a fixed‑price power purchase agreement with a nearby hydroelectric facility owned by a Brookfield affiliate. This facility is over 70 years old and any breakdown could result in the Alloy facility having to purchase more grid power at higher rates. The energy supply for our Mendoza, Argentina facility is supplied by both the national network administrator Cammesa and by the local utility Edemsa (approximately 50% each) under a power agreement expiring in December 2019 with a low rate specifically approved for ultra electrointensive industries. The extension of this rate after December 2019 is being negotiated. There can be no assurance that such negotiations will be completed on terms we consider to be commercially reasonable, or at all.

Energy supply to our facilities in South Africa is provided by Eskom (State-owned power utility) through rates that are approved annually by the national power regulator (NERSA). These rates have had an upward trend in the past years, due to the instability of available supply, and are likely to continue increasing. Also, NERSA applies certain revisions to rates based on cost variances for Eskom that are not within our control. We have completed negotiations with Eskom for a new power contract for 2018 and 2019.

In Spain, power is purchased in a competitive wholesale market. Our facilities have to pay access tariffs to the national grid and get certain payments in exchange for providing services to the grid (i.e., interruptibility services). The volatile nature of the wholesale market in Spain results in price uncertainty that can be only partially offset by financial hedging contracts. Also, the payment we receive for the services provided to the grid are a major component of our power supply arrangements in Spain, and regulation for such services has been altered several times during the past years and the economic benefits of such services vary significantly from one year to the next, affecting our production cost and results from our operations.

In addition, France, South Africa and the U.S., our energy purchase arrangements depend to a certain extent on rebates or revenues that we get for providing different services to the grid (interruptibility, load shaving, off-peak consumption, etc.). These rebates may be significant and the arrangements with the grid operator or with the regulator may vary, which may affect our production costs and results from our operations.

Energy prices in Spain are volatile and such volatility could have a material adverse effect on our business, results of operations, and financial condition.

Almost all of the revenues from Ferroglobe’s energy segment are tied, either directly or indirectly, to wholesale market prices for electricity in Spain, which are volatile and may decline due to a number of factors that are not within our control.  These include the price of fuels used to generate electricity by other means, the amount of excess generating capacity relative to load in particular markets, the cost of controlling polluting emissions, the structure and regulation of the electricity market overall, and fluctuations in demand, including weather conditions that impact electrical load. In addition, other power generators may develop new technologies or improvements to traditional technologies to produce power that could increase the supply of electricity and cause a sustained reduction in market prices for electricity.

The possible divestiture in the future of any of our hydroelectric power operations would result in a greater exposure to increases in electricity prices in that market.

Our energy operations and revenues depend largely on government regulation of the power sector and our business may be adversely affected if such policies are amended or eliminated.

Our energy operations and revenues depend largely on government regulation of the power sector. For example, in 2013, Spain introduced a new regulatory regime for renewable energies, which, among other things, suspended the pre‑existing feed‑in tariff support scheme for renewable energy producers that had benefitted us. This has had an adverse effect on the profitability of our energy operations, as prices at which we are able to sell electricity are now substantially dependent on the volatile wholesale market. If other power sector programs and regulations are adversely amended, reduced, eliminated, or subjected to new restrictions, it could have a material adverse effect on the profitability of our energy operations.

Losses caused by disruptions in the supply of power would reduce our profitability.

Large amounts of electricity are used to produce silicon metal, manganese‑ and silicon‑based alloys and other specialty alloys, and our operations are heavily dependent upon a reliable supply of electrical power. We may incur losses due to a temporary or prolonged interruption of the supply of electrical power to our facilities, which can be caused by unusually high demand, blackouts, equipment failure, natural disasters or other catastrophic events, including failure of the hydroelectric facilities that currently provide power under contract to our West Virginia, New York, Québec and Argentina facilities. Additionally, on occasion, we have been instructed to suspend operations for several hours by the sole energy supplier in South Africa due to a general power shortage in the country. It is possible that this supplier may instruct us to suspend our operations for a similar or longer period in the future. Such interruptions or reductions in the supply of electrical power adversely affect production levels and may result in reduced profitability. Our insurance coverage does not cover all interruption events and may not be sufficient to cover losses incurred as a result.

In addition, investments in Argentina’s electricity generation and transmission systems have been lower than the increase in demand in recent years. If this trend is not reversed, there could be electricity supply shortages as the result of inadequate generation and transmission capacity. Given the heavy dependence on electricity of our manufacturing operations, any electricity shortages could adversely affect our financial results.

Government regulations of electricity in Argentina give priority of use of hydroelectric power to residential users and subject violators of these restrictions to significant penalties. This preference is particularly acute during Argentina’s winter months due to a lack of natural gas. We have previously successfully petitioned the government to exempt us from these restrictions given the demands of our business for continuous supply of electric power. If we are unsuccessful in our petitions or in any action we take to ensure a stable supply of electricity, our production levels may be adversely affected and our profitability reduced.

Any decrease in the availability, or increase in the cost, of raw materials or transportation could materially increase our costs.

Principal components in the production of silicon metal, silicon‑based alloys and manganese‑based alloys include metallurgical‑grade coal, charcoal, graphite and carbon electrodes, manganese ore, quartzite, wood chips, steel scrap, and other metals. While we own certain sources of raw materials, we also buy raw materials on a spot or contracted basis. The availability of these raw materials and the prices at which we purchase them from third‑party suppliers depend on market supply and demand and may be volatile. Our ability to obtain these materials in a cost efficient and timely manner is dependent on certain suppliers, their labor union relationships, mining and lumbering regulations and output and general local economic conditions.  In 2018, manganese ore prices remained at historically high levels throughout the year. As a result, the profitability of our manganese-based operations was adversely affected.  

Over the previous years, certain raw materials (particularly graphite electrodes, coal, manganese ore, and other electrode components) have experienced significant price increases and quick price moves in relatively short periods of time. In some cases, this has been combined with certain shortage in the availability of such raw materials. While we try to anticipate potential shortages in the supply of critical raw materials with longer term contracts and other purchasing strategies, these price swings and supply shortages may affect our cost of production or even cause interruptions in our operations, which may have a material adverse effect on our business, results of operations and financial condition.

We make extensive use of shipping by sea, rail and truck to obtain the raw materials used in our production and deliver our products to customers, depending on the geographic region and product or input. Raw materials and products often must be transported over long distances between mines and other production sites and the plants where raw materials are consumed, and between those sites and our customers. Any severe delay, interruption or other disruption in such transportation, any material damage to raw materials utilized by us or to our products while being transported, or a sharp rise in transportation prices could have a material adverse effect on our business, results of operations and financial condition. In addition, because we may not be able to obtain adequate supplies of raw materials from alternative sources on terms as favorable as our current arrangements, or at all, any disruption or shortfall in the production and delivery of raw materials could result in higher raw materials costs and likewise materially adversely affect our business, results of operations and financial condition.

Cost increases in raw material inputs may not be passed on to our customers, which could negatively impact our profitability.

The prices of our raw material inputs are determined by supply and demand, which may be influenced by, inter alia, economic growth and recession, changes in world politics, unstable governments in exporting nations, and inflation. The market prices of raw material inputs will thus fluctuate over time, and we may not be able to pass significant price increases on to our customers. If we do try to pass them on, we may lose sales and thereby revenue, in addition to having the higher costs. Additionally, decreases in the market prices of our products will not necessarily enable us to obtain lower prices from our suppliers.

Metallurgical manufacturing and mining are inherently dangerous activities and any accident resulting in injury or death of personnel or prolonged production shutdowns could adversely affect our business and operations.

Metallurgical manufacturing generally, and smelting in particular, is inherently dangerous and subject to risks of fire, explosion and sudden major equipment failure. Quartz and coal mining are also inherently dangerous and subject to numerous hazards, including collisions, equipment failure, accidents arising from the operation of large mining and rock transportation equipment, dust inhalation, flooding, collapse, blasting operations and operating in extreme climatic conditions. These hazards have led to accidents resulting in the serious injury and death of production personnel and prolonged production shutdowns in the past. We may experience fatal accidents or equipment malfunctions in the future, which could have a material adverse effect on our business and operations.

In 2018, there was regrettably a fatal accident involving one of our employees following an explosion at our plant in Selma, Alabama.

We are heavily dependent on our mining operations, which are subject to certain risks that are beyond our control and which could result in materially increased expenses and decreased production levels.

We mine quartz and quartzite at open pit mining operations and coal at underground and surface mining operations. We are heavily dependent on these mining operations for our quartz and coal supplies. Certain risks beyond our control could disrupt our mining operations, adversely affect production and shipments, and increase our operating costs, such as: a major incident at the mine site that causes all or part of the operations of the mine to cease for some period of time; mining, processing and plant equipment failures and unexpected maintenance problems; changes in reclamation costs; the inability to renew mining concessions upon their expiration; the expropriation of territory subject to a valid concession without sufficient compensation; and adverse weather and natural disasters, such as heavy rains or snow, flooding and other natural events affecting operations, transportation or customers.

Regulatory agencies have the authority under certain circumstances following significant health and safety violations or incidents to order a mine to be temporarily or even permanently closed. If this occurs, we may be required to incur significant legal and capital expenditures to re‑open the affected mine. In addition, environmental regulations and enforcement could impose unexpected costs on our mining operations, and future regulations could increase those costs or limit our ability to produce quartz and sell coal. A failure to obtain and renew permits necessary for our mining operations could limit our production and negatively affect our business. It is also possible that we have extracted or may in the future extract quartz from territory beyond the boundary of our mining concession or mining right, which could result in penalties or other regulatory action or liabilities.

We are subject to environmental, health and safety regulations, including laws that impose substantial costs and the risk of material liabilities.

Our operations are subject to extensive foreign, federal, national, state, provincial and local environmental, health and safety laws and regulations governing, among other things, the generation, discharge, emission, storage, handling, transportation, use, treatment and disposal of hazardous substances; land use, reclamation and remediation; waste management and pollution prevention measures; greenhouse gas emissions; and the health and safety of our employees. We are also required to obtain permits from governmental authorities for certain operations, and to comply with related laws and regulations. We may not have been and may not be at all times in full compliance with such permits and related laws and regulations. If we violate or fail to comply with these permits and related laws and regulations, we could be subject to penalties, restrictions on operations or other sanctions, obligations to install or upgrade pollution control equipment and legal claims, including for alleged personal injury or property or environmental damages. Such liability could adversely affect our reputation, business, results of operations and financial condition. In addition, in the context of an investigation, the government may impose obligations to make technology upgrades to our facilities that could result in our incurring material capital expenses. For example, we have received two Notices and Findings of Violation (“NOV/FOV”) from the U.S. federal government, alleging numerous violations of the Clean Air Act relating to Globe Metallurgical Inc.’s (“GMI”) Beverly, Ohio facility. Should GMI and the federal government be unable to reach a negotiated resolution of the NOV/FOVs, the U.S. government could file a formal lawsuit in U.S. federal court for injunctive relief, potentially requiring GMI to implement emission reduction measures, and for civil penalties. The statutory maximum penalty is $93,750 per day per violation, from April, 2013 to the present. See “Item 8.A.—Financial Information—Consolidated Financial Statements and Other Financial Information—Legal proceedings” for additional information.

The metals and mining industry is generally subject to risks and hazards, including fire, explosion, toxic gas leaks, releases of other hazardous materials, rockfalls, and incidents involving mobile equipment, vehicles or machinery. These could occur by accident or by breach of operating and maintenance standards, and could result in personal injury, illness or death of employees or contractors, or in environmental damage, delays in production, monetary losses and possible legal liability.

Under certain environmental laws, we could be required to remediate or be held responsible for the costs relating to contamination at our or our predecessors’ past or present facilities and at third party waste disposal sites. We could also be held liable under these environmental laws for sending or arranging for hazardous substances to be sent to third party disposal or treatment facilities if such facilities are found to be contaminated. Under these laws we could be held liable

even if we did not know of, or did not cause, such contamination, or even if we never owned or operated the contaminated disposal or treatment facility.

There are a variety of laws and regulations in place or being considered at the international, federal, regional, state and local levels of government that restrict or propose to restrict and impose costs on emissions of carbon dioxide and other greenhouse gases. These legislative and regulatory developments may cause us to incur material costs if we are required to reduce or offset greenhouse gas emissions, or to purchase emission credits or allowances, and may result in a material increase in our energy costs due to additional regulation of power generators. Environmental laws are complex, change frequently and are likely to become more stringent in the future. Because environmental laws and regulations are becoming more stringent and new environmental laws and regulations are continuously being enacted or proposed, such as those relating to greenhouse gas emissions and climate change, the level of expenditures required for environmental matters could increase in the future. Future legislative action and regulatory initiatives could result in changes to operating permits, additional remedial actions, material changes in operations, increased capital expenditures and operating costs, increased costs of the goods we sell, and decreased demand for our products that cannot be assessed with certainty at this time.

Therefore, our costs of complying with current and future environmental laws, and our liabilities arising from past or future releases of, or exposure to, hazardous substances may adversely affect our business, results of operations and financial condition.

Compliance with existing and proposed climate change laws and regulations could adversely affect our performance.

Under current European Union legislation, all industrial sites are subject to cap‑and‑trade programs, by which every facility with carbon emissions is required to purchase in the market emission rights for volumes of emission that exceed a certain allocated level. So far, and until 2020, the allocated level of emissions is sufficient for our business such that any of emissions rights purchases will have a limited impact on our business. After 2020, however, new regulations reducing the allocation of free allowances may require us to make significant purchases of emissions rights in the market. Also, certain Canadian provinces have implemented cap‑and‑trade programs. As a result, our facilities in Canada and in the European Union may be required to purchase emission credits in the future. The requirement to purchase emissions rights in the market could result in material increased compliance costs, additional operating restrictions for our business, and an increase in the cost of the products we produce, which could have a material adverse effect on our financial position, results of operations, and liquidity.

In other jurisdictions, including the United States and South Africa, some pending proposals for climate change legislation would require businesses that emit greenhouse gases to buy emission credits from the government, other businesses or through an auction process. While no such requirements applicable to our business have yet been enacted, if any such program were enacted in the future, we may be required to purchase emission credits for greenhouse gas emissions resulting from our operations. Although it is not possible at this time to predict what, if any, climate change laws or regulations will be enacted, any new restrictions on greenhouse gas emissions, including a cap‑and‑trade program or an emissions tax, could result in material increased compliance costs, additional operating restrictions for our business, and an increase in the cost of the products we produce, which could have a material adverse effect on our financial position, results of operations and liquidity.

We make a significant portion of our sales to a limited number of customers, and the loss of a portion of the sales to these customers could have a material adverse effect on our revenues and profits.

In the year ended December 31, 2018, our ten largest customers accounted for approximately 33% of Ferroglobe’s consolidated revenue.  We expect that we will continue to derive a significant portion of our business from sales to these customers.

Some contracts with our customers do not entail commitments from the customer to purchase specified or minimum volumes of products over time. Accordingly, we face a risk of unexpected reduced demand for our products from such customers as a result of, for instance, downturns in the industries in which they operate or any other factor affecting their business, which could have a material adverse effect on our revenues and profits.

If we were to experience a significant reduction in the amount of sales we make to some or all of such customers and could not replace these sales with sales to other customers, this could have a material adverse effect on our revenues and profits.

Our business benefits from antidumping and countervailing duty orders and laws that protect our products by imposing special duties on unfairly traded imports from certain countries. If these duties or laws change, certain foreign competitors might be able to compete more effectively.

Antidumping and countervailing duty orders are designed to provide relief from imports sold at unfairly low or subsidized prices by imposing special duties on such imports. Such orders normally benefit domestic suppliers and foreign suppliers not covered by the orders. In the United States, antidumping duties are in effect covering silicon metal imports from China and Russia. In the European Union, antidumping duties are in place covering silicon metal imports from China and ferrosilicon imports from China and Russia. In Canada, antidumping and countervailing duties are in place covering silicon metal imports from China.

The current antidumping and countervailing duty orders may not remain in effect and continue to be enforced from year to year, the products and countries now covered by orders may no longer be covered, and duties may not continue to be assessed at the same rates. In the United States, rates of duty can change as a result of “administrative reviews” of antidumping and countervailing duty orders. These orders can also be revoked as a result of periodic “sunset reviews,” which determine whether the orders will continue to apply to imports from particular countries. Antidumping and countervailing duties in the European Union and Canada are also subject to periodic reviews. In the European Union and in Canada, such reviews can include interim reviews, expiry reviews and other types of proceedings that may result in changes in rates of duty or termination of the duties.

Similarly, export duties imposed by foreign governments that are currently in place may change. For example, duties on Chinese exports of types of ferroalloys produced by Ferroglobe could be reduced.

Changes in any of these factors could adversely affect our business and profitability. Finally, at times, in filing trade actions, we arguably act against the interests of our customers. Certain of our customers may not continue to do business with us as a result.

In December 2016, Ferroglobe subsidiaries in Canada filed a complaint with the Canada Border Services Agency alleging that silicon metal from Brazil, Kazakhstan, Laos, Malaysia, Norway, Russia and Thailand is dumped, and that silicon metal from Brazil, Kazakhstan, Malaysia, Norway and Thailand is subsidized. In March 2017, Ferroglobe subsidiary Globe Specialty Metals petitioned the U.S. Department of Commerce and the U.S. International Trade Commission to provide relief from dumped and subsidized silicon metal imports from Australia, Brazil, Kazakhstan and Norway. In both cases, the agencies found that imports covered by the cases were unfairly traded, but determined that the domestic industry was not injured by the unfair imports.  In Canada, an appeal was filed but ultimately was discontinued in May 2018.

An administrative review of the antidumping duty order on silicon metal from China involving a single exporter/producer combination is currently in progress. The review may result in the elimination or reduction of the duties currently payable on imports from that exporter/producer combination. If the duties are eliminated or reduced significantly, our sales in the United States may be adversely affected.

A sunset (expiry) review of the Canadian antidumping/countervailing duty order covering silicon metal imports from China is currently being conducted, which may result in the removal of the duties on such imports. If the duties are removed, our sales in Canada may be adversely affected.

In June 2017, Euroalliages (representing European Union producers including Ferroglobe) filed a complaint with the Directorate-General for Trade of the European Commission (“DG Trade”) alleging that ferro-silicon originating in Egypt and Ukraine is dumped.  In April 2018, the Commission notified interested parties that the complaint had been withdrawn and that it considered that the investigation should be terminated without measures.  The fact that the case was not successful could adversely affect our sales or our relationships with customers in the European Union. 

In addition, Euroalliages filed a request with the European Commission on behalf of Ferroglobe subsidiaries FerroAtlàntica, S.A. and FerroPem for an expiry review of the antidumping measures on ferrosilicon from China and Russia.  Based on this request, the European Commission initiated in April 2019 a review to determine whether to maintain the antidumping measures in place and the rates of duty to be imposed.

In November 2017, Ferroglobe subsidiaries in the European Union filed a complaint with DG Trade of the European Commission alleging that silicon metal originating in Brazil and Bosnia is dumped.  In 2018, that complaint was withdrawn.

Products we manufacture may be subject to unfair import competition that may affect our profitability.

A number of the products we manufacture, including silicon metal and ferrosilicon, are globally-traded commodities that are sold primarily on the basis of price. As a result, our sales volumes and prices may be adversely affected by influxes of imports of these products that are dumped or are subsidized by foreign governments. Our silicon metal and ferrosilicon operations have been injured by such unfair import competition in the past. The antidumping and countervailing duty laws provide a remedy for unfairly traded imports in the form of special duties imposed to offset the unfairly low pricing or subsidization. However, the process for obtaining such relief is complex and uncertain. As a result, while we have sought and obtained such relief in the past, in some cases we have not been successful. Thus, there is no assurance that such relief will be obtained, and if it is not, unfair import competition could have a material adverse effect on our business, results of operations and financial condition.

Competitive pressure from Chinese steel, aluminum, polysilicon and silicone producers may adversely affect the business of our customers, reducing demand for our products. Our customers may relocate to China, where they may not continue purchasing from us.

China’s aluminum, polysilicon and steel producing capacity exceeds local demand and has made China an increasingly large net exporter of aluminum and steel, and the Chinese silicone manufacturing industry is growing. Chinese aluminum, polysilicon, steel and silicone producers — who are unlikely to purchase silicon metal, manganese‑ and silicon‑based alloys and other specialty metals from our plants outside of China due to the ample availability of domestic Chinese production — may gain global market share at the expense of our customers. An increase in Chinese aluminum, steel, polysilicon and silicone industry market share could adversely affect the production volumes, revenue and profits of our customers, resulting in reduced purchases of our products.

Moreover, our customers might seek to relocate or refocus their operations to China or other countries with lower labor costs and higher growth rates. Any that do so might thereafter choose to purchase from other suppliers of silicon metal, manganese‑ and silicon‑based alloys and other specialty metals which in turn could have a material adverse effect on our business, results of operations and financial condition.

We are subject to the risk of union disputes and work stoppages at our facilities, which could have a material adverse effect on our business.

A majority of our employees are members of labor unions. In the future, we may experience protracted negotiations with labor unions, strikes, work stoppages or other industrial actions from time to time. Strikes called by employees or unions could materially disrupt our operations, including productions schedules and delivery times. We have experienced strikes by our employees at several of our facilities from time to time. Any such work stoppage could have a material adverse effect on our business, results of operations and financial condition.

New labor contracts will have to be negotiated to replace expiring contracts from time to time. It is possible that future collective bargaining agreements will contain terms less favorable than the current agreements. Any failure to negotiate renewals of labor contracts on terms acceptable to us, with or without work stoppages, could have a materially adverse effect on our business, results of operations and financial condition.

Many of our key customers or suppliers are similarly subject to union disputes and work stoppages, which may reduce their demand for our products or interrupt the supply of critical raw materials and impede their ability to fulfil their commitments under existing contracts. In 2016, we temporarily reduced production at one of our plants as a result of a strike affecting one of our customers which resulted in delays in contract shipment dates and led to a decrease in prices for certain of our products.

We are dependent on key personnel.

Our success depends in part upon the retention of key employees. Competition for qualified personnel can be intense. Current and prospective employees may experience uncertainty about our business or industry, which may impair our ability to attract, retain and motivate key management, sales, technical and other personnel.

If key employees depart our overall business may be harmed. We also may have to incur significant costs in identifying, hiring and retaining replacements for departing employees, may lose significant expertise and talent relating to our business and our ability to further realize the anticipated benefits of the Business Combination may be adversely affected. In addition, the departure of key employees could cause disruption or distractions for management and other personnel. Furthermore, we cannot be certain that we will be able to attract and retain replacements of a similar caliber as departing key employees.

The long term success of our operations depends to a significant degree on the continued employment of our core senior management team.  In particular, we are dependent on the skills, knowledge and experience of Javier López Madrid, our Executive Chairman, Pedro Larrea Paguaga, our Chief Executive Officer, and Phillip Murnane, our Chief Financial Officer. If these employees are unable to continue in their respective roles, or if we are unable to attract and retain other skilled employees, our business, results of operations and financial condition could be adversely affected. We currently have employment agreements with Messrs. López Madrid, Larrea Paguaga and Murnane. These agreements contain certain non‑compete provisions, which may not be fully enforceable by us. Additionally, we are substantially dependent upon key personnel among our financial and information technology staff, who enable us to meet our regulatory, contractual and financial reporting obligations, including reporting requirements under our credit facilities.

In certain circumstances, the members of our Board may have interests that may conflict with yours as a holder of ordinary shares.

Our directors have no duty to us with respect to any information such directors may obtain (i) otherwise than as our directors and (ii) in respect of which directors owe a duty of confidentiality to another person, provided that where a director’s relationship with such other person gives rise to a conflict, such conflict has been authorized by our Board in accordance with our articles of association (“Articles”). Our Articles provide that a director shall not be in breach of the general duties directors owe to us pursuant to the UK Companies Act 2006 because such director:

In such circumstances, certain interests of the members of our Board may not be aligned with your interests as a holder of ordinary shares and the members of our Board may engage in certain business and other transactions without any accountability or obligation to us.

Shortages of skilled labor could adversely affect our operations.

We depend on skilled labor for the operation of our submerged arc furnaces and other facilities. Some of our facilities are located in areas where demand for skilled personnel often exceeds supply. Shortages of skilled furnace technicians and other skilled workers could restrict our ability to maintain or increase production rates, lead to production inefficiencies and increase our labor costs.

We may not realize the cost savings, synergies and other benefits that we expect to achieve from the Business Combination or from further operational improvements.

The integration of formerly independent companies is a complex, costly and time-consuming process. We thus are required to devote significant management attention and resources to integrating our business practices and operations. The ongoing integration process may disrupt our business and, if implemented ineffectively, could preclude full realization of the anticipated benefits of the Business Combination.

Further, we are constantly looking for opportunities to improve our operations through changes in technology, processes, information systems, and management best practices. These continuous improvement initiatives are complex and require skilled management and labor to implement them.

In our efforts to integrate and improve our operations fully and successfully, we may encounter material unanticipated problems, expenses, liabilities, competitive responses, loss of client relationships, and a resulting diversion of management’s attention. The challenges include, among others:

Many of these factors are outside of our control and any one of them could result in increased costs, decreased revenues and diversion of management’s time and energy, which could materially impact our business, results of operations and financial condition. Moreover, even if the operations of FerroAtlántica and Globe are integrated successfully, we may not fully realize the benefits of the Business Combination, including the synergies, cost savings or sales or growth opportunities that we expect, within the anticipated time frame or at all. As a result, we cannot assure our shareholders that the Business Combination will result in the full realization of the benefits anticipated.

Because the proceeds of the R&W Policy will not be sufficient to fully compensate for losses attributable to breaches of representations and warranties made by Grupo VM and FerroAtlántica in the Business Combination Agreement, and the proceeds under the R&W Policy are required to be distributed to the holders of the Trust Units, we may be required to use our existing cash on hand or draw under our credit facility to fund any actual loss incurred.

We purchased a Representations and Warranties insurance policy (the “R&W Policy”) in connection with the Business Combination to insure us against breaches of certain representations and warranties made by Grupo Villar Mir S.A.U. (“Grupo VM”) and FerroAtlántica in the Business Combination Agreement (as defined below). The R&W Policy has a face amount equal to $50,000,000 and is subject to an initial retention amount of $10,000,000, as well as other limitations and conditions. As a result of Grupo VM’s ownership of the Company following completion of the Business Combination, the R&W Policy only provides insurance to the extent of approximately 43% of insurable losses incurred by us. Accordingly, the proceeds of the R&W Policy will not be sufficient to fully compensate for losses attributable to breaches of representations and warranties made by Grupo VM and FerroAtlántica. In addition, we will not be able to recover losses attributable to breaches of certain representations and warranties that are excluded from the R&W Policy or for which coverage under the R&W Policy expired in December 2018 or for losses that would result in payments under the R&W Policy in excess of the $50,000,000 face amount of the R&W Policy.

On November 18, 2016, Ferroglobe completed the distribution to the holders of our ordinary shares at the time of beneficial interest units (the “Trust Units”) in a newly formed Delaware Statutory Trust, Ferroglobe Representation and Warranty Insurance Trust (“Ferroglobe R&W Trust”), to which Ferroglobe had assigned its interest in the R&W Policy. Having assigned the R&W Policy, if we suffer a loss attributable to breaches of representations and warranties by Grupo VM or FerroAtlántica, we will be required to use our existing cash on hand or draws under our credit facility to fund the actual loss incurred to the extent that it is not met by Grupo VM, in the case of a breach by Grupo VM. Losses attributable to breaches of representations and warranties by Grupo VM or FerroAtlántica could have a material adverse effect on our business, financial condition and results of operations.

Any failure to integrate recently acquired businesses successfully or to complete future acquisitions successfully could be disruptive of our business and limit our future growth.

From time to time, we expect to pursue acquisitions in support of our strategic goals. In connection with any such acquisition, we could face significant challenges in managing and integrating our expanded or combined operations, including acquired assets, operations and personnel. There can be no assurance that acquisition opportunities will be available on acceptable terms or at all or that we will be able to obtain necessary financing or regulatory approvals to complete potential acquisitions. Our ability to succeed in implementing our strategy will depend to some degree upon the ability of our management to identify, complete and successfully integrate commercially viable acquisitions. Acquisition transactions may disrupt our ongoing business and distract management from other responsibilities.

For example, in February 2018, we completed the acquisition from a wholly-owned subsidiary of Glencore International AG (“Glencore”) of a 100% interest in Glencore’s manganese alloys plants in Mo i Rana (Norway) and Dunkirk (France).  Although the purchase was made under what we believe to be favorable financial terms and we expect it to result in a 10-20% increase in Company-wide revenue, the acquisition increases the management complexity of our operations, adds a new currency (Norwegian Krone) to our foreign exchange exposure, and will require additional attention from management in order for us to successfully integrate and capture synergies. There can be no assurance that the acquisition will result in the realization of the benefits anticipated. Specifically, during 2018 the manganese alloys and the manganese ore markets have evolved in such way that margins in these specific operations have significantly eroded and results and profitability from these operations were below historical averages.

Grupo VM, our principal shareholder, has significant voting power with respect to corporate matters considered by our shareholders.

Our principal shareholder, Grupo VM, owns shares representing approximately 54% of the aggregate voting power of our capital stock. By virtue of Grupo VM’s voting power, as well as Grupo VM’s representation on the Board, Grupo VM will have significant influence over the outcome of any corporate transaction or other matters submitted to our shareholders

for approval. Grupo VM will be able to block any such matter, including ordinary resolutions, which, under English law, require approval by a majority of outstanding shares cast in the vote. Grupo VM will also be able to block special resolutions, which, under English law, require approval by the holders of at least 75% of the outstanding shares entitled to vote and voting on the resolution, such as an amendment of the Articles or the exclusion of preemptive rights. Our principal shareholder has, and will continue to have, directly or indirectly, the power, among other things, to affect our legal and capital structure and our day-to-day operations, as well as the ability to elect and change our management and to approve other changes to our operations.

Grupo VM, has pledged most of its shares in our company to secure a syndicate loan led by Crédit Suisse; if Grupo VM defaults on the underlying loan, we could experience a change in control.

Grupo VM guaranteed its obligations pursuant to a credit agreement (the “GVM Credit Agreement”), which allows them to borrow up to €115 million (“GVM Loan”). In June 2018, Grupo VM entered into a security and pledge agreement (the “GVM Pledge Agreement”), with a syndicate of banks and funds led by Crédit Suisse (the “Lenders”), pursuant to which Grupo VM agreed to pledge most of its shares to the Lenders to secure the outstanding GVM Loan.

In the event Grupo VM defaults under the GVM Credit Agreement, the Lenders may foreclose on the shares subject to the pledge. In such case, we could experience a change of control. Upon a change in control, we may be required, among other things, immediately to repay outstanding principal as well as, accrued interest and any other amounts owed by us under one or more of our bank facilities or our other debt.  If upon a change of control, we do not have sufficient funds available to make such payments out of our available cash, third party financing would be needed, yet may be impermissible under our other debt agreements. In addition, certain other contracts we are party to from time to time may contain change of control provisions. Upon a change in control, such provisions may be triggered, which could cause our contracts to be terminated or give rise to other obligations, each of which could have a material adverse effect on our business, results of operations and financial condition.

We may engage in related party transactions with affiliates of Grupo VM, our principal shareholder.

Conflicts of interest may arise between our principal shareholder and your interests as a shareholder. Our principal shareholder has, and will continue to have, directly or indirectly, the power, among other things, to affect our day-to-day operations, including the pursuit of related party transactions. We have entered, and may in the future enter, into agreements with companies who are affiliates of Grupo VM, our principal shareholder. Such agreements have been approved by, or would be subject to the approval of, the Board or the Audit Committee, as its delegate. The terms of such agreements may present material risks to our business and results of operations. For example, we recently entered into a series of projects and an agreement in respect of a joint venture with Aurinka Photovoltaic Group S.L. (“Aurinka”) and Blue Power Corporation S.L. (“Blue Power”), a company partly owned by Mr. Javier López Madrid, our Executive Chairman. We have also entered into a number of other agreements with affiliates of Grupo VM with respect to, among other things, the provision of information technology and data processing services and the management of certain aspects of our hydroelectric plants. See “Item 7.B.—Major Shareholders and Related Party Transactions—Related Party Transactions.” 

We are exposed to significant risks in relation to compliance with anti-bribery and corruption laws, anti-money laundering laws and regulations, and economic sanctions programs.

Doing business on a worldwide basis requires us to comply with the laws and regulations of various jurisdictions. In particular, our international operations are subject to anti-corruption laws, most notably the U.S. Foreign Corrupt Practices Act of 1977 (“FCPA”) and the UK Bribery Act of 2010 (the “Bribery Act”), international trade sanctions programs, most notably those administered by the U.N., U.S. and European Union, anti-money laundering laws and regulations, and laws against human trafficking and slavery, most notably the UK Modern Slavery Act 2015 (“Modern Slavery Act”).

The FCPA and Bribery Act prohibit offering or providing anything of value to foreign officials for the purposes of obtaining or retaining business or securing any improper business advantage. We may deal from time to time with both governments and state-owned business enterprises, the employees of which are considered foreign officials for purposes

of these laws.  International trade sanctions programs restrict our business dealings with or relating to certain sanctioned countries and certain sanctioned entities and persons no matter where located.

As a result of doing business internationally, we are exposed to a risk of violating applicable anti-bribery and corruption (“ABC”) laws, international trade sanctions, and anti-money laundering (“AML”) laws and regulations. Some of our operations are located in developing countries that lack well-functioning legal systems and have high levels of corruption. Our continued expansion and worldwide operations, including in developing countries, our development of joint venture relationships worldwide, and the engagement of local agents in the countries in which we operate tend to increase the risk of violations of such laws and regulations. Violations of ABC laws, AML laws and regulations, and trade sanctions are punishable by civil penalties, including fines, denial of export privileges, injunctions, asset seizures, debarment from government contracts (and termination of existing contracts) and revocations or restrictions of licenses, as well as criminal penalties including possible imprisonment. Moreover, any major violations could have a significant impact on our reputation and consequently on our ability to win future business.

For its part, the Modern Slavery Act requires any commercial organization that carries on a business or part of a business in the United Kingdom which (i) supplies goods or services and (ii) has an annual global turnover of £36 million to prepare a slavery and human trafficking statement for each financial year ending on or after March 31, 2016. In this statement, the commercial organization must set out the steps it has taken to ensure there is no modern slavery in its own business and its supply chain, or provide an appropriate negative statement. The UK Secretary of State may enforce this duty by means of civil proceedings. Ferroglobe is currently in compliance with the Act, and we believe it will remain so, but the nature of our operations and the regions in which we operate may make it difficult or impossible for us to detect all incidents of modern slavery in certain of our supply chains. Any failure in this regard would not violate the Modern Slavery Act per se, but could have a significant impact on our reputation and consequently on our ability to win future business.

We seek to build and continuously improve our systems of internal controls and to remedy any weaknesses identified.  As part of our efforts to comply with all applicable law and regulation, we have introduced a global ethics and compliance program. We believe we are devoting appropriate time and resources to its implementation, related training, and to monitoring compliance. Despite these efforts, we cannot be certain that our policies and procedures will be followed at all times or that we will prevent or timely detect violations of applicable laws, regulations or policies by our personnel, partners or suppliers. Any actual or alleged failure to comply with applicable laws or regulations could lead to material liabilities not covered by insurance or other significant losses, which in turn could have a material adverse effect on our business, results of operations, and financial condition.

We operate in a highly competitive industry.

The silicon metal market and the silicon‑based and manganese‑based alloys markets are global, capital intensive and highly competitive. Our competitors may have greater financial resources, as well as other strategic advantages, to maintain, improve and possibly expand their facilities, and, as a result, they may be better positioned than we are to adapt to changes in the industry or the global economy. Advantages that our competitors have over us from time to time, new entrants that increase competition in our industry, and increases in the use of substitutes for certain of our products could have a material adverse effect on our business, results of operations and financial condition.

Though we are not currently operating at full capacity, we have historically operated at near the maximum capacity of our operating facilities. Because the cost of increasing capacity may be prohibitively expensive, we may have difficulty increasing our production and profits.

Our facilities are able to manufacture, collectively, approximately 416,750 tons of silicon metal (including Dow’s portion of the capacity of our Alloy, West Virginia and Bécancour, Québec plants), 534,000 tons of silicon-based alloys and 689,000 tons of manganese-based alloys on an annual basis. Our ability to increase production and revenues will depend on expanding existing facilities, acquiring facilities or building new ones. Increasing capacity is difficult because:

We may not have sufficient funds to expand existing facilities, acquire new facilities, or open new ones and may be required to incur significant debt to do so, which could have a material adverse effect on our business and financial condition.

We are subject to restrictive covenants under our credit facilities and other financing agreements. These covenants could significantly affect the way in which we conduct our business. Our failure to comply with these covenants could lead to an acceleration of our debt.

We have entered into credit facilities that contain covenants that in certain circumstances, among other things, restrict our ability to sell assets; incur, repay or refinance indebtedness; create liens; make investments; engage in mergers or acquisitions; pay dividends, including dividends by subsidiaries to Ferroglobe PLC; repurchase stock; or make capital expenditures. These credit facilities also require compliance with specified financial covenants, including minimum interest coverage, maximum leverage ratio, maximum secured leverage ratio and minimum cash liquidity level. We cannot borrow under the credit facilities if the additional borrowings would cause a breach of such financial covenants. Further, a significant portion of our assets are pledged to secure the indebtedness. For example, certain equity interests and assets are pledged to secure our Revolving Credit Facility.

We have in the past breached certain financial covenants under our credit facilities, including financial maintenance covenants for the three months ended September 30 and December 31, 2016 under our then existing revolving credit facility. Our ability to comply with applicable debt covenants may be affected by events beyond our control, potentially leading to future breaches. The breach of any of the covenants contained in our credit facilities, unless waived, would constitute an event of default, in turn permitting the lenders to terminate their commitments to extend credit under, and accelerate the maturity of, the credit facilities in question. If in such circumstances we were unable to repay lenders and holders, or obtain waivers from them on acceptable terms or at all, the lenders and holders could foreclose upon the collateral securing the credit facilities and exercise other rights.   Such events, should they occur, could have a material adverse effect on our business, results of operations and financial condition. See “—Risks Related to Our Capital Structure—We are subject to restrictive covenants under our financing agreements, which could impair our ability to run our business” below.

Our insurance costs may increase materially, and insurance coverages may not be adequate to protect us against all risks and potential losses to which we may be subject.

We maintain various forms of insurance covering a number of specified and consequential risks and losses arising from insured events under the policies, including securities claims, certain business interruptions and claims for damage and loss caused by certain natural disasters, such as earthquakes, floods and windstorms. Our existing property and liability insurance coverage contains various exclusions and limitations on coverage. In some previous insurance policy renewals, we have acceded to larger premiums, self‑insured retentions and deductibles. For example, as a result of the explosion at our facility in Chateau Feuillet, France, the applicable property insurance premium increased. We may also be subject to additional exclusions and limitations on coverage in future insurance policy renewals. There can be no assurance that the insurance policies we have in place are or will be sufficient to cover all potential losses we may incur. In addition, due to changes in our circumstances and in the global insurance market, insurance coverage may not continue to be available to us on terms we consider commercially reasonable or be sufficient to cover multiple large claims.

We have operations and assets in the United States, Spain, France, Canada, China, South Africa, Norway, Venezuela, Poland, Argentina, Mauritania and may have operations and assets in other countries in the future. Our international operations and assets may be subject to various economic, social and governmental risks.

Our international operations and sales may expose us to risks that are more significant in developing markets than in developed markets and which could negatively impact future revenue and profitability. Operations in developing countries may not operate or develop in the same way or at the same rate as might be expected in a country with an economy, government and legal system similar to western countries. The additional risks that we may be exposed to in such cases include, but are not limited to:

In addition to the foregoing, exchange controls and restrictions on transfers abroad and capital inflow restrictions have limited, and can be expected to continue to limit, the availability of international credit.

The critical social, political and economic conditions in Venezuela have adversely affected, and may continue to adversely affect, our results of operations.

Among other policies in recent years, the Venezuelan government has continuously devalued the Bolívar.  The resulting inflation has devastated the country, which is experiencing all manner of shortages of basic materials and other goods and difficulties in importing raw materials. In 2016, we idled our Venezuelan operations and sought to determine the recoverable value of the long lived assets there. We concluded that the costs to dispose of the facility exceeded the fair value of the assets, primarily due to political and financial instability in Venezuela. Accordingly, we wrote down the full value of our Venezuelan operations. Our Venezuelan subsidiary has been able to meet its obligations (tax, labor, power costs and others) in the past through the sales of existing stock to customers. However, our inability to generate cash in

that market may cause us to default on some of our obligations there in the future, which may result in administrative intervention or other consequences. If the social, political and economic conditions in Venezuela continue as they are, or worsen, our business, results of operations and financial condition could be adversely affected.

We are exposed to foreign currency exchange risk and our business and results of operations may be negatively affected by the fluctuation of different currencies.

We transact business in numerous countries around the world and a significant portion of our business entails cross border purchasing and sales. Our sales made in a particular currency do not exactly match the amount of our purchases in such currency. We prepare our consolidated financial statements in U.S. Dollars, while the financial statements of each of our subsidiaries are prepared in the entities functional currency. Accordingly, our revenues and earnings are continuously affected by fluctuations in foreign currency exchange rates. For example, our sales made in U.S. Dollars exceed the amount of our purchases made in U.S. Dollars, such that the appreciation of certain currencies (like the Euro or the South African Rand) against the U.S. Dollar would tend to have an adverse effect on our costs. Such adverse movements in relevant exchange rates could have a material adverse effect on our business, results of operations and financial condition.

We depend on a limited number of suppliers for certain key raw materials. The loss of one of these suppliers or the failure of one of any of them to meet contractual obligations to us could have a material adverse effect on our business.

Colombia and the United States are among the preferred sources for the metallurgical coal consumed in the production of silicon metal and silicon-based alloys, and the vast majority of producers source coal from these two countries. In the year ended December 31, 2018, approximately 70% of our coal was purchased from third parties. Of our third party purchases, approximately 70% came from Colombia. Additionally, nearly all of the manganese ore we purchase comes from suppliers located in South Africa and Gabon. We do not control these third party suppliers and must rely on them to perform in accordance with the terms of their contracts. If these suppliers fail to provide us with the required raw materials in a timely manner, or at all, or if the quantity or quality of the materials they provide is lower than that contractually agreed, we may not be able to procure adequate supplies of raw materials from alternative sources on comparable terms, or at all, which could have a material adverse effect on our business, results of operations and financial condition.

Planned investments in the expansion and improvement of existing facilities and in the construction of new facilities may not be successful.

We are engaged in significant capital improvements to our existing facilities to upgrade and add capacity to those facilities. We also may engage in the development and construction of new facilities. Should any such efforts not be completed in a timely manner and within budget, or be unsuccessful otherwise, we may incur additional costs or impairments which could have a material adverse effect on our business, results of operations and financial condition.

If hydrology conditions at our hydropower facilities are unfavorable or below our estimates, our electricity production, and therefore our revenue, may be substantially below our expectations.

The revenues generated by our hydroelectric operations are determined by the amount of electricity generated, which in turn is entirely dependent upon available water flows that may vary significantly over time. Rainfall and resulting hydrology conditions naturally vary from season to season and from year to year and may also change permanently because of climate change or other factors. A material reduction in seasonal rainfall will cause affected hydropower plants to run at a reduced capacity and therefore produce less electricity, adversely impacting revenue and profitability.

Moreover, if too much rainfall occurs at any one time, water may flow too quickly and at volumes in excess of a particular hydropower plant’s designated operational levels, requiring the discharge of water through sluice gates rather than the plant’s turbines. Such conditions, as well as flooding, lightning strikes, earthquakes, severe storms, wildfires, and other unfavorable weather conditions (including those due to climate change), may require us to bypass turbines or shut down facilities, decreasing electricity production levels and revenues.

Any delay or failure to procure, renew or maintain necessary governmental permits, including environmental permits and concessions to operate our hydropower plants would adversely affect our results of operations.

The operation of our hydropower plants is highly regulated, requires various governmental permits, including environmental permits and concessions, and may be subject to the imposition of conditions by government authorities. We cannot predict whether the conditions prescribed in such permits and concessions will be achievable. The denial of a permit essential to a hydropower plant or the imposition of impractical conditions would impair our ability to operate the plant. If we fail to satisfy the conditions or comply with the restrictions imposed by governmental permits or concessions, or restrictions imposed by other applicable statutory or regulatory requirements, we may face enforcement action and be subject to fines, penalties or additional costs or revocation of such permits or concessions. Any failure to procure, renew or abide by necessary permits and concessions would adversely affect the operation of our hydropower plants.

In Spain, the use and exploitation of the hydropower plants located in Galicia are not only subject to the limitations imposed on their concession certificates, but also to the limitations imposed by environmental regulation related to water distribution and flows. Power generation and the use of water at all hydropower plants must meet the requirements set out in the Spanish National Hydrological Plan and the various provisions and acts of the Spanish Water Administration. Any further restrictions on our ability to use water at these plants would negatively impact our hydropower production and further expose us to increases in power prices in Spain.

Equipment failures may lead to production curtailments or shutdowns and repairing any failure could require us to incur capital expenditures and other costs.

Many of our business activities are characterized by substantial investments in complex production facilities and manufacturing equipment. Because of the complex nature of our production facilities, any interruption in manufacturing resulting from fire, explosion, industrial accidents, natural disaster, equipment failures or otherwise could cause significant losses in operational capacity and could materially and adversely affect our business, results of operations and financial condition.

Our hydropower generation assets and other equipment may not continue to perform as they have in the past or as they are expected. A major equipment failure due to wear and tear, latent defect, design error or operator error, early obsolescence, natural disaster or other force majeure event could cause significant losses in operational capacity. Repairs following such failures could require us to incur capital expenditures and other costs. Such major failures also could result in damage to the environment or damages and harm to third parties or the public, which could expose us to significant liability.  Such costs and liabilities could adversely affect our business, results of operations and financial condition.

We depend on proprietary manufacturing processes and software. These processes may not yield the cost savings that we anticipate and our proprietary technology may be challenged.

We rely on proprietary technologies and technical capabilities in order to compete effectively and produce high quality silicon metal and silicon-based alloys, including:

We are subject to a risk that:

Patent or other intellectual property infringement claims may be asserted against us by a competitor or others. Our intellectual property rights may not be enforceable and may not enable us to prevent others from developing and marketing competitive products or methods. An infringement action against us may require the diversion of substantial funds from our operations and may require management to expend efforts that might otherwise be devoted to operations. A successful challenge to the validity of any of our patents may subject us to a significant award of damages, and may oblige us to secure licenses of others’ intellectual property, which could have a material adverse effect on our business, results of operations and financial condition.

We also rely on trade secrets, know‑how and continuing technological advancement to maintain our competitive position. We may not be able to effectively protect our rights to unpatented trade secrets and know‑how.

Ferroglobe PLC is a holding company whose principal source of revenue is the income received from its subsidiaries.

Ferroglobe PLC is dependent on the income generated by its subsidiaries in order to earn distributable profits and pay dividends to shareholders. The amounts of distributions and dividends, if any, to be paid to us by any operating subsidiary will depend on many factors, including such subsidiary’s results of operations and financial condition, limits on dividends under applicable law, its constitutional documents, documents governing any indebtedness, applicability of tax treaties and other factors which may be outside our control. If our operating subsidiaries do not generate sufficient cash flow, we may be unable to earn distributable profits and pay dividends on our shares.

Our business operations may be impacted by various types of claims, lawsuits, and other contingent obligations.

We are involved in various legal and regulatory proceedings including those that arise in the ordinary course of our business. We estimate such potential claims and contingent liabilities and, where appropriate, record provisions to address these contingent liabilities. The ultimate outcome of the legal matters currently pending against our Company is uncertain, and although such claims, lawsuits and other legal matters are not expected individually to have a material adverse effect, such matters in the aggregate could have a material adverse effect on our business, results of operations and financial condition. Furthermore, we could, in the future, be subject to judgments or enter into settlements of lawsuits and claims that could have a material adverse effect on our results of operations in any particular period. While we maintain insurance coverage in respect of certain risks and liabilities, we may not be able to obtain such insurance on acceptable terms in the future, if at all, and any such insurance may not provide adequate coverage against such claims. See “Item 8.A.—Financial Information—Consolidated Statements and Other Financial Information—Legal proceedings” for additional information regarding legal proceedings to which we are party.

We are exposed to changes in economic and political conditions where we operate and globally that are beyond our control.

Our industry is affected by changing economic conditions, including changes in national, regional and local unemployment levels, changes in national, regional and local economic development plans and budgets, shifts in business investment and consumer spending patterns, credit availability, and business and consumer confidence. Disruptions in national economies and volatility in the financial markets may and often will reduce consumer confidence, negatively affecting business investment and consumer spending.  The outlook for the global economy in the near to medium term is uncertain due to several factors, including geopolitical risks and concerns about global growth and stability. Concerns also remain regarding the sustainability of the European Monetary Union and its common currency, the Euro, in their current form, particularly

following the referendum vote in favor of the United Kingdom’s exit from the European Union in June 2016, the UK Prime Minister’s formal delivery of a notice of withdrawal from the European Union in March 2017 (“Brexit”), and the UK House of Commons’ repeated rejection of the proposed Agreement on the Withdrawal of the United Kingdom from the European Union in January and March 2019.

In addition, we may face risks associated with the current uncertainty as to whether and on what terms the United Kingdom will exit the European Union and the consequences that may result from such exit, in particular with respect to tax, customs and duty laws and regulations, volatility in exchange rates and interest rates, the ability of certain of our personnel to work at our headquarters in London, and our ability to sell and transport products from manufacturing facilities on the continent to our customers in the United Kingdom.

We are not able to predict the timing or duration of periods economic growth in the countries where we operate or sell products, nor are we able to predict the timing or duration of any economic downturn or recession that may occur in the future.

Cybersecurity breaches and threats could disrupt our business operations and result in the loss of critical and confidential information.

We rely on the effective functioning and availability of our information technology and communication systems and the security of such systems for the secure processing, storage and transmission of confidential information. The sophistication and magnitude of cybersecurity incidents are increasing and include, among other things, unauthorized access, computer viruses, deceptive communications and malware. Information technology security processes may not effectively detect or prevent cybersecurity breaches or threats and the measures we have taken to protect against such incidents may not be sufficient to anticipate or prevent rapidly evolving types of cyber-attacks. Breaches of the security of our information technology and communication systems could result in destruction or corruption of data, the misappropriation, corruption or loss of critical or confidential information, business disruption, reputational damage, litigation and remediation costs.

Possible new tariffs and duties that might be imposed by certain governments, including the United States, the European Union and others, could have a material adverse effect on our results of operations.

In March 2018, the President of the United States announced import tariffs of 25 percent on steel and 10 percent on aluminum, with exemptions for Canada and Mexico only.  Beginning in July 2018, the U.S. government imposed 25 or 10 percent tariffs on a wide array of Chinese products, including products produced and consumed by Ferroglobe. In response, China imposed retaliatory tariffs on a wide range of U.S. products.  The United States and China are engaged in negotiations in an effort to resolve the trade dispute between the two countries. Nevertheless, the tariffs imposed to date and other such actions by the United States and China could result in the imposition of new tariffs by other countries. Any “trade war” resulting from the imposition of tariffs could have a significant adverse effect on world trade and the world economy. To date, tariffs have not affected our business to a material degree. 

Our suppliers, customers, agents or business partners may be subject to or affected by export controls or trade sanctions imposed by government authorities from time to time, which may restrict our ability to conduct business with them and potentially disrupt our production or our sales.

The United States, European Union, United Nations and other authorities have variously imposed export controls and trade sanctions on certain countries, companies, individuals and products, restricting our ability to trade normally with or in them. At present, compliance with such trade regulation is not affecting our business to a material degree. However, new trade regulations may be imposed at any time that target or otherwise affect our customers, suppliers, agents or business partners or their products. In particular, trade sanctions could be imposed that restrict our ability to do business with one or more critical suppliers and require special licenses to do so. Such events could potentially disrupt our production or sales and have a material adverse effect on our business, results of operations and financial condition.

We make significant investments in the development of new technologies and new products. The success of such technologies or products is inherently uncertain and the investments made may fail to render the desired increased in profitability.

In order to improve our processes and increase the margins in our products we have constantly invested significant amounts in the development of new technologies and in the development of new value added products. However, these developments are inherently uncertain, since they may fail to render the desired results when implemented at an industrial scale.

Specifically, we have invested in the construction of a factory to produce solar-grade silicon metal through a technology developed by the Company. We believe the technology presents several advantages when compared to current solar-grade silicon production processes since the technology has proven to render the desired technological and cost results at a laboratory scale. However, the implementation of the technology at an industrial scale is challenging especially in light of current market conditions. The current market for solar-grade silicon (or polysilicon) is very volatile and has suffered from declining prices in the past few years. Further investment in this project has been temporarily suspended and the future profitability of this project is uncertain.

Risks Related to Our Capital Structure

We have recorded a significant amount of goodwill and we may not realize the full value thereof.

We have recorded a significant amount of goodwill. Total goodwill, which represents the excess of the cost of acquisitions over our interest in the net fair value of the assets acquired and liabilities and contingent liabilities assumed, was $202,848 thousand as of December 31, 2018, or approximately 10% of our total assets. Goodwill is recorded on the date of acquisition and, in accordance with IFRS, is tested for impairment annually and whenever there is any indication of impairment. Impairment may result from, among other things, deterioration in our performance, a decline in expected future cash flows, adverse market conditions, adverse changes in applicable laws and regulations (including changes that restrict or otherwise affect our mining and other operating activities) and a variety of other factors. The amount of any impairment must be expensed immediately as a charge to our consolidated income statement. For example, in 2017, in connection with our annual goodwill impairment test, the Company recognized an impairment charge of $30,618 thousand related to the partial impairment of goodwill related to our business unit in Canada, which was recorded as a result of a sustained decline in future estimated sales prices and a decrease in our estimated long-term growth rate that led the Company to revise its expected future cash flows from its Canadian operations. See “Item 5.A.—Operating and Financial Review and Prospects—Operating Results—Critical Accounting Policies—Goodwill.” Our forecasts present inevitable elements of uncertainty due to the unpredictability of future events and the characteristics of the relevant market; therefore, our ability to meet forecasts may affect future evaluations, including goodwill impairment assessments. Any future impairment of goodwill may result in material reductions of our income and equity under IFRS.

Our leverage may make it difficult for us to service our debt and operate our business.

We have significant outstanding indebtedness and debt service requirements. Our leverage could have important consequences, including:

Our ability to service our indebtedness will depend on our future performance and liquidity, which will be affected by prevailing economic conditions and financial, business, regulatory and other factors. Many of these factors are beyond our control. We may not be able to generate enough cash flow from operations or obtain enough capital to service our indebtedness or fund our planned capital expenditures. If we cannot service our indebtedness and meet our other obligations and commitments, we might be required to refinance our indebtedness, obtain additional financing, delay planned capital expenditures or to dispose of assets to obtain funds for such purpose. We cannot assure you that any refinancing or asset dispositions could be effected on a timely basis or on satisfactory terms, if at all, or would be permitted by the terms of our outstanding debt instruments.

We are subject to restrictive covenants under our financing agreements, which could impair our ability to run our business.

Restrictive covenants under our financing agreements, including the Indenture and the Revolving Credit Facility, may restrict our ability to operate our business. Our failure to comply with these covenants, including as a result of events beyond our control, could result in an event of default that could materially and adversely affect our business, results of operations and financial condition.

In particular, the Indenture and the Revolving Credit Facility contain negative covenants restricting, among other things, our ability to:

All of these limitations are subject to significant exceptions and qualifications.

The restrictions contained in our financing agreements could affect our ability to operate our business and may limit our ability to react to market conditions or take advantage of potential business opportunities as they arise. For example, such restrictions could adversely affect our ability to finance our operations, make strategic acquisitions, investments or alliances, restructure our organization or finance our capital needs. Additionally, our ability to comply with these covenants and restrictions may be affected by events beyond our control. These include prevailing economic, financial and industry conditions. If we breach any of these covenants or restrictions, we could be in default under our financing agreements.

If there were an event of default under any of our debt instruments that is not cured or waived, the holders of the defaulted debt could terminate their commitments thereunder and declare all amounts outstanding with respect to such indebtedness due and payable immediately, which, in turn, could result in cross-defaults under our other outstanding debt instruments. Any such actions could force us into bankruptcy or liquidation.

We may not be able to generate sufficient cash to pay our accounts payable, meet our debt service obligations or meet our obligations under other financing agreements, in which case our creditors could declare all amounts owed to them due and payable, leading to liquidity constraints.

Our ability to make interest payments and to meet our other debt service obligations, or to refinance our debt, depends on our future operating and financial performance, which, in turn, depends on our ability to successfully implement our business strategies and plans as well as general economic, financial, competitive, regulatory and other factors beyond our control. If we cannot generate sufficient cash to meet our debt service requirements, we may, among other things, need to refinance all or a portion of our debt to obtain additional financing, delay planned capital expenditures or investments or sell material assets.

If we are not able to refinance any of our debt, obtain additional financing or sell assets on commercially reasonable terms or at all, we may not be able to satisfy our debt obligations. If we are also unable to satisfy our obligations on other financing arrangements, we could be in default under our existing financing agreements or other relevant financing agreements that we may enter into in the future. In the event of certain defaults under existing agreements, the lenders under the respective facilities or financing instruments could take certain actions, including terminating their commitments and declaring all principal amounts outstanding under our credit facilities and other indebtedness due and payable, together with accrued and unpaid interest. Such a default, or a failure to make interest payments, could cause borrowings under other debt instruments that contain cross-acceleration or cross-default provisions to become due and payable on an accelerated basis. If the debt under any of the material financing arrangements that we have entered into or will subsequently enter into were to be accelerated, our assets may be insufficient to repay the outstanding debt in full. Any such actions could force us into bankruptcy or liquidation, and we might not be able to repay our obligations under our financing agreements in such an event.

Risks Related to Our Ordinary Shares

Our share price may be volatile, and purchasers of our ordinary shares could incur substantial losses.

Our share price has been volatile in the recent past and may be so in the future. Moreover, stock markets in general experience periods of extreme volatility that are often unrelated to the operating performance of particular companies. As

a result of this volatility, you may not be able to sell our ordinary shares at or above the price at which you purchase them. The market price for our shares may be influenced by many factors, including:

If securities or industry analysts do not publish or cease publishing research reports about us, if they adversely change their recommendations regarding our ordinary shares, or if our operating results do not meet their expectations, the price of our ordinary shares could decline.

The trading market for our ordinary shares will be influenced by the research and reports that industry or securities analysts may publish about us, our business, our market or our competitors. Securities and industry analysts currently publish limited research on us. If there is limited or no securities or industry analyst coverage of us, the market price and trading volume of our ordinary shares would likely be negatively impacted. Moreover, if any of the analysts who may cover us downgrade our ordinary shares or provide relatively more favorable recommendations concerning our competitors, or as we experienced in 2018, if our operating results or prospects do not meet their expectations, the market price of our ordinary shares could decline. If any of the analysts who may cover us were to cease coverage or fail regularly to publish reports about our Company, we could lose visibility in the financial markets, which, in turn, could cause our share price or trading volume to decline.

As a foreign private issuer and “controlled company” within the meaning of the rules of NASDAQ, we are subject to different U.S. securities laws and NASDAQ governance standards than domestic U.S. issuers of securities. These may afford relatively less protection to holders of our ordinary shares, and you may not receive all corporate and company information and disclosures that you are accustomed to receiving or in a manner in which you are accustomed to receiving it.

As a foreign private issuer, the rules governing the information that we disclose differ from those governing U.S. corporations pursuant to the U.S. Securities Exchange Act of 1934, as amended (“U.S. Exchange Act”). Although we intend to report periodic financial results and certain material events, we are not required to file quarterly reports on Form 10-Q or provide current reports on Form 8 K disclosing significant events within four days of their occurrence. In addition, we are exempt from the SEC’s proxy rules, and proxy statements that we distribute will not be subject to review by the SEC. Our exemption from Section 16 rules requiring the reporting of beneficial ownership and sales of shares by insiders means that you will have less data in this regard than shareholders of U.S. companies that are subject to this part of the U.S. Exchange Act. As a result, in deciding whether to purchase our shares, you may not have all the data that you are accustomed to having when making investment decisions with respect to domestic U.S. public companies.

As a “controlled company” within the meaning of the corporate governance standards of NASDAQ, we may elect not to comply with certain corporate governance requirements, including:

We may utilize these exemptions for as long as we continue to qualify as a “controlled company.” While exempt, we will not be required to have a majority of independent directors, our nominations and compensation committees will not be required to consist entirely of independent directors and such committees will not be subject to annual performance evaluations.

Furthermore, NASDAQ Rule 5615(a)(3) provides that a foreign private issuer, such as our Company, may rely on home country corporate governance practices in lieu of certain of the rules in the NASDAQ Rule 5600 Series and Rule 5250(d), provided that we nevertheless comply with NASDAQ’s Notification of Noncompliance requirement (Rule 5625), the Voting Rights requirement (Rule 5640) and that we have an audit committee that satisfies Rule 5605(c)(3), consisting of committee members that meet the independence requirements of Rule 5605(c)(2)(A)(ii). Although we are permitted to follow certain corporate governance rules that conform to U.K. requirements in lieu of many of the NASDAQ corporate governance rules, we intend to comply with the NASDAQ corporate governance rules applicable to foreign private issuers. Accordingly, our shareholders will not have the same protections afforded to stockholders of U.S. companies that are subject to all of the corporate governance requirements of NASDAQ.

We may lose our foreign private issuer status in the future, which could result in significant additional costs and expenses.

We could cease to be a foreign private issuer if a majority of our outstanding voting securities are directly or indirectly held of record by U.S. residents and we fail to meet additional requirements necessary to avoid loss of foreign private issuer status. In that event, the regulatory and compliance costs we would incur as a domestic registrant may be significantly higher than we incur as a foreign private issuer, which could have a material adverse effect on our business, operating results and financial condition.

If Grupo VM’s share ownership falls below 50%, we may no longer be considered a “controlled company” within the meaning of the rules of NASDAQ.

In the event Grupo VM sells shares in our Company to such an extent that it thereafter owns less than 50% of the total voting rights in our shares, we would no longer be considered a “controlled company” within the meaning of the corporate governance standards of NASDAQ. Under NASDAQ rules, a company that ceases to be a controlled company must comply with the independent board committee requirements as they relate to the nominating and corporate governance and compensation committees on the following phase-in schedule: (1) one independent committee member at the time it ceases to be a controlled company, (2) a majority of independent committee members within 90 days of the date it ceases to be a controlled company, and (3) all independent committee members within one year of the date it ceases to be a controlled company. Additionally, NASDAQ rules provide a 12 month phase-in period from the date a company ceases to be a controlled company to comply with the majority independent board requirement. If, within the phase-in periods, we are not able to recruit additional directors who would qualify as independent, or otherwise fail to comply with applicable NASDAQ rules, we may be subject to delisting by NASDAQ. Furthermore, a change in our board of directors and committee membership may result in a change in corporate strategy and operation philosophies, which could have a material adverse effect on our business, results of operations and financial condition.

As an English public limited company, certain capital structure decisions require shareholder approval, which may limit our flexibility to manage our capital structure.

English law provides that a board of directors may only allot shares (or rights or convertible into shares) with the prior authorization of shareholders, such authorization being up to the aggregate nominal amount of shares and for a maximum period of five years, each as specified in the articles of association or relevant shareholder resolution. The Articles authorize the allotment of additional shares for a period of five years from October 26, 2017 (being the date of the adoption of the Articles), which authorization will need to be renewed upon expiration (i.e., at least every five years) but may be sought more frequently for additional five-year terms (or any shorter period).

English law also generally provides shareholders with preemptive rights when new shares are issued for cash. However, it is possible for the articles of association, or for shareholders acting in a general meeting, to exclude preemptive rights. Such an exclusion of preemptive rights may be for a maximum period of up to five years from the date of adoption of the articles of association, if the exclusion is contained in the articles of association, or from the date of the shareholder resolution, if the exclusion is by shareholder resolution. In either case, this exclusion would need to be renewed by our shareholders upon its expiration (i.e., at least every five years). The Articles exclude preemptive rights for a period of five years from October 26, 2017, which exclusion will need to be renewed upon expiration (i.e., at least every five years) to remain effective, but may be sought more frequently for additional five-year terms (or any shorter period).

English law also generally prohibits a public company from repurchasing its own shares without the prior approval of shareholders by ordinary resolution, such being a resolution passed by a simple majority of votes cast, and other formalities. As an English company listed on NASDAQ, we may not make on-market purchases of our shares and may make off-market purchases only for the purposes of or pursuant to an employees’ share scheme where our shareholders have approved our doing so by ordinary resolution (and with a maximum duration of such approval of five years) or with the prior consent of our shareholders by ordinary resolution to the proposed contract for the purchase of our shares.

English law requires that we meet certain financial requirements before we declare dividends or repurchases.

Under English law, we may only declare dividends, make distributions or repurchase shares out of distributable reserves of the Company or distributable profits. “Distributable profits” are a company’s accumulated, realized profits, so far as not previously utilized by distribution or capitalization, less its accumulated, realized losses, so far as not previously written off in a reduction or reorganization of capital duly made, as reported to the Companies House. In addition, as a public company, we may only make a distribution if the amount of our net assets is not less than the aggregate amount of our called-up share capital and undistributable reserves and if, and to the extent that, the distribution does not reduce the amount of those assets to less than that aggregate amount. The Articles permit declaration of dividends by ordinary resolution of the shareholders, provided that the directors have made a recommendation as to its amount. The dividend shall not exceed the amount recommended by the directors. The directors may also decide to pay interim dividends if it appears to them that the profits available for distribution justify the payment. When recommending or declaring the payment of a dividend, the directors will be required under English law to comply with their duties, including considering our future financial requirements.

The enforcement of shareholder judgments against us or certain of our directors may be more difficult.

Because we are a public limited company incorporated under English law, and because most of our directors and executive officers are non-residents of the United States and substantially all of the assets of such directors and executive officers are located outside of the United States, our shareholders could experience more difficulty enforcing judgments obtained against our Company or our directors in U.S. courts than would currently be the case for U.S. judgments obtained against a U.S. public company or U.S. resident directors. In addition, it may be more difficult (or impossible) to assert some types of claims against our Company or its directors in courts in England, or against certain of our directors in courts in Spain, than it would be to bring similar claims against a U.S. company or its directors in a U.S. court.

The United States is not currently bound by a treaty with Spain or the United Kingdom providing for reciprocal recognition and enforcement of judgments rendered in civil and commercial matters with Spain or the United Kingdom, other than

arbitral awards. There is, therefore, doubt as to the enforceability of civil liabilities based upon U.S. federal securities laws in an action to enforce a U.S. judgment in Spain or the United Kingdom. In addition, the enforcement in Spain or the United Kingdom of any judgment obtained in a U.S. court based on civil liabilities, whether or not predicated solely upon U.S. federal securities laws, will be subject to certain conditions. There is also doubt that a court in Spain or the United Kingdom would have the requisite power or authority to grant remedies in an original action brought in Spain or the United Kingdom on the basis of U.S. federal securities laws violations.

Risks Related to Tax Matters

The application of Section 7874 of the Code, including under recent IRS guidance, and changes in law could affect our status as a foreign corporation for U.S. federal income tax purposes.

We believe that, under current law, we should be treated as a foreign corporation for U.S. federal income tax purposes. However, the U.S. Internal Revenue Service (the “IRS”) may assert that we should be treated as a U.S. corporation for U.S. federal income tax purposes pursuant to Section 7874 of the Internal Revenue Code of 1986, as amended (the “Code”). Under Section 7874 of the Code, we would be treated as a U.S. corporation for U.S. federal income tax purposes if, after the Business Combination, (i) at least 80% of our ordinary shares (by vote or value) were considered to be held by former holders of common stock of Globe by reason of holding such common stock, as calculated for Section 7874 purposes, and (ii) our expanded affiliated group did not have substantial business activities in the United Kingdom (the “80% Test”). (The percentage (by vote and value) of our ordinary shares considered to be held by former holders of common stock of Globe immediately after the Business Combination by reason of their holding common stock of Globe is referred to in this disclosure as the “Section 7874 Percentage.”)

Determining the Section 7874 Percentage is complex and, with respect to the Business Combination, subject to legal uncertainties. In that regard, the IRS and U.S. Department of the Treasury (“U.S. Treasury”) issued rules (the “Temporary Regulations”), which include a rule that applies to certain transactions in which the Section 7874 Percentage is at least 60% and the parent company is organized in a jurisdiction different from that of the foreign target corporation (the “Third Country Rule”). This rule applies to transactions occurring on or after November 19, 2015, which date is prior to the closing of the Business Combination. If the Third Country Rule were to apply to the Business Combination, the 80% Test would be deemed met and we would be treated as a U.S. corporation for U.S. federal income tax purposes. While we believe the Section 7874 Percentage is less than 60% such that the Third Country Rule does not apply to us, we cannot assure you that the IRS will agree with this position and would not successfully challenge our status as a foreign corporation. If the IRS successfully challenged our status as a foreign corporation, significant adverse tax consequences would result for us and could apply to our shareholders.

In addition to the final rules to be promulgated with respect to the Temporary Regulations, changes to Section 7874 of the Code, the U.S. Treasury Regulations promulgated thereunder, or to other relevant tax laws (including under applicable tax treaties) could adversely affect our status or treatment as a foreign corporation, and the tax consequences to our affiliates, for U.S. federal income tax purposes, and any such changes could have prospective or retroactive application. Recent legislative proposals have aimed to expand the scope of U.S. corporate tax residence, including by potentially causing us to be treated as a U.S. corporation if the management and control of us and our affiliates were determined to be located primarily in the United States, or by reducing the Section 7874 Percentage at or above which we would be treated as a U.S. corporation such that it would be lower than the threshold imposed under the 80% Test.

Recent IRS guidance and changes in law could affect our ability to engage in certain acquisition strategies and certain internal restructurings.

Even if we are treated as a foreign corporation for U.S. federal income tax purposes, the Temporary Regulations materially changed the manner in which the Section 7874 Percentage will be calculated in certain future acquisitions of U.S. businesses in exchange for our equity, which may affect the tax efficiencies that otherwise might be achieved in transactions with third parties. For example, the Temporary Regulations would impact certain acquisitions of U.S. companies for our Ordinary Shares (or other stock) in the 36 month period beginning December 23, 2015, by excluding from the Section 7874 Percentage the portion of Ordinary Shares that are allocable to former holders of common stock of

Globe. This new rule would generally have the effect of increasing the otherwise applicable Section 7874 Percentage with respect to our future acquisition of a U.S. business. The Temporary Regulations also may more generally limit the ability to restructure the non-U.S. members of our Company to achieve tax efficiencies.

Recent IRS proposed regulations and changes in laws or treaties could affect the expected financial synergies of the Business Combination.

The IRS and the U.S. Treasury also issued rules that provide that certain intercompany debt instruments issued on or after April 5, 2016, will be treated as equity for U.S. federal income tax purposes, therefore limiting U.S. tax benefits and resulting in possible U.S. withholding taxes. As a result of these rules, we may not be able to realize a portion of the financial synergies that were anticipated in connection with the Business Combination, and such rules may materially affect our future effective tax rate. While these new rules are not retroactive, they could impact our ability to engage in future restructurings if such transactions cause an existing debt instrument to be treated as reissued. Furthermore, under certain circumstances, recent treaty proposals by the U.S. Treasury, if ultimately adopted by the United States and relevant foreign jurisdictions, could reduce the potential tax benefits for us and our affiliates by imposing U.S. withholding taxes on certain payments from our U.S. affiliates to related and unrelated foreign persons.

We are subject to tax laws of numerous jurisdictions and our interpretation of those laws is subject to challenge by the relevant governmental authorities.

We and our subsidiaries are subject to tax laws and regulations in the United Kingdom, the United States, France, Spain and the other jurisdictions in which we operate. These laws and regulations are inherently complex and we and our subsidiaries are (and have been) obligated to make judgments and interpretations about the application of these laws and regulations to us and our subsidiaries and their operations and businesses. The interpretation and application of these laws and regulations could be challenged by the relevant governmental authority, which could result in administrative or judicial procedures, actions or sanctions, which could be material.

We intend to operate so as to be treated exclusively as a resident of the United Kingdom for tax purposes, but the relevant tax authorities may treat us as also being a resident of another jurisdiction for tax purposes.

We are a company incorporated in the United Kingdom. Current U.K. tax law provides that we will be regarded as being a U.K. resident for tax purposes from incorporation and shall remain so unless (i) we were concurrently resident of another jurisdiction (applying the tax residence rules of that jurisdiction) that has a double tax treaty with the United Kingdom and (ii) there is a tiebreaker provision in that tax treaty which allocates exclusive residence to that other jurisdiction.

Based upon our management and organizational structure, we believe that we should be regarded solely as resident in the United Kingdom from our incorporation for tax purposes. However, because this analysis is highly factual and may depend on future changes in our management and organizational structure, there can be no assurance regarding the final determination of our tax residence. Should we be treated as resident in a country or jurisdiction other than the United Kingdom, we could be subject to taxation in that country or jurisdiction on our worldwide income and may be required to comply with a number of material and formal tax obligations, including withholding tax and reporting obligations provided under the relevant tax law, which could result in additional costs and expenses.

We may not qualify for benefits under the tax treaties entered into between the United Kingdom and other countries.

We intend to operate in a manner such that, when relevant, we are eligible for benefits under the tax treaties entered into between the United Kingdom and other countries. However, our ability to qualify and continue to qualify for such benefits will depend upon the requirements contained within each treaty and the applicable domestic laws, as the case may be, on the facts and circumstances surrounding our operations and management, and on the relevant interpretation of the tax authorities and courts.

Our or our subsidiaries’ failure to qualify for benefits under the tax treaties entered into between the United Kingdom and other countries could result in adverse tax consequences to us and our subsidiaries and could result in certain tax consequences of owning or disposing of our ordinary shares differing from those discussed below.

Future changes to domestic or international tax laws or to the interpretation of these laws by the governmental authorities could adversely affect us and our subsidiaries.

The U.S. Congress, the U.K. Government, the Organization for Economic Co-operation and Development and other government agencies in jurisdictions where we and our affiliates do business have had an extended focus on issues related to the taxation of multinational corporations. One example is in the area of “base erosion and profit shifting” (or “BEPS”), in which payments are made between affiliates from a jurisdiction with high tax rates to a jurisdiction with lower tax rates. Thus, the tax laws in the United States, the United Kingdom or other countries in which we and our affiliates do business could change on a prospective or retroactive basis, and any such changes could adversely affect us. Furthermore, the interpretation and application of domestic or international tax laws made by us and our subsidiaries could differ from that of the relevant governmental authority, which could result in administrative or judicial procedures, actions or sanctions, which could be material. On July 1, 2018, OECD’s so-called “Multi-Lateral Instrument” entered into force covering 87 jurisdictions and impacting over 1,200 double tax treaties. The adoption of the Anti Tax Avoidance Directives (known as “ATAD 1 & 2”) by the European Union is another key development.

Further developments are to be seen in areas such as the “making tax digital - initiatives” allowing authorities to monitor multinationals’ tax position on a more real time basis and the contemplated introduction of new taxes, such as revenue-based digital services taxes aimed at technology companies, but which may impact traditional businesses as well.

We may become subject to income or other taxes in jurisdictions which would adversely affect our financial results.

We and our subsidiaries are subject to the income tax laws of the United Kingdom, the United States, France, Spain and the other jurisdictions in which we operate. Our effective tax rate in any period is impacted by the source and the amount of earnings among our different tax jurisdictions. A change in the division of our earnings among our tax jurisdictions could have a material impact on our effective tax rate and our financial results. In addition, we or our subsidiaries may be subject to additional income or other taxes in these and other jurisdictions by reason of the management and control of our subsidiaries, our activities and operations, where our production facilities are located or changes in tax laws, regulations or accounting principles. Although we have adopted guidelines and operating procedures to ensure our subsidiaries are appropriately managed and controlled, we may be subject to such taxes in the future and such taxes may be substantial. The imposition of such taxes could have a material adverse effect on our financial results.

We may incur current tax liabilities in our primary operating jurisdictions in the future.

We expect to make current tax payments in some of the jurisdictions where we do business in the normal course of our operations. Our ability to defer the payment of some level of income taxes to future periods is dependent upon the continued benefit of accelerated tax depreciation on our plant and equipment in some jurisdictions, the continued deductibility of external and intercompany financing arrangements and the application of tax losses prior to their expiration in certain tax jurisdictions, among other factors. The level of current tax payments we make in any of our primary operating jurisdictions could adversely affect our cash flows and have a material adverse effect on our financial results.

Changes in tax laws may result in additional taxes for us.

We cannot assure you that tax laws in the jurisdictions in which we reside or in which we conduct activities or operations will not be changed in the future. Such changes in tax law could result in additional taxes for us.

U.S. federal income tax reform could adversely affect us.

Legislation commonly known as the Tax Cuts and Jobs Act (the “TCJA”) was enacted on December 22, 2017 in the United States. The TCJA made significant changes to the U.S. federal tax code, including a reduction in the U.S. federal corporate

statutory tax rate from 35% to 21%.  The TCJA also made changes to the U.S. federal taxation of foreign earnings and to the timing of recognition of certain revenue and expenses and the deductibility of certain business expenses. We examined the impact the TCJA may have on our business in detail during 2018. Although further guidance continued to be released by the IRS until recently, we have concluded that tax reform should not have a material adverse impact on the taxation of our US business. Our work has also led to the conclusion that there should not be an impact from the one-off “transition tax” on certain historic non-U.S. earnings, and consequently the related one-off tax charge of $1.7 million that was recorded in 2017 has been reversed in 2018. This annual report does not discuss in detail the TCJA or the manner in which it might affect us or our stockholders. We urge you to consult with your own legal and tax advisors with respect to the Tax Reform Act and the potential tax consequences of investing in our shares.

Our transfer pricing policies are open to challenge from taxation authorities internationally.

Tax authorities have become increasingly focused on transfer pricing in recent years. Due to our international operations and an increasing number of inter-company cross-border transactions, we are open to challenge from tax authorities with regard to the pricing of  such transactions. A successful challenge by tax authorities may lead to a reallocation of taxable income to a different tax jurisdiction and may potentially lead to a higher tax bill overall for the Company.

ITEM 4.       INFORMATION ON THE COMPANY

A.    History and Development of the Company

Ferroglobe PLC

Ferroglobe PLC, initially named VeloNewco Limited, was incorporated under the U.K. Companies Act 2006 as a private limited liability company in the United Kingdom on February 5, 2015, as a wholly-owned subsidiary of Grupo VM. On October 16, 2015 VeloNewco Limited re-registered as a public limited company. As a result of the Business Combination, which was completed on December 23, 2015, FerroAtlántica and Globe merged through corporate transactions to create Ferroglobe PLC, one of the largest producers worldwide of silicon metal and silicon- and manganese-based alloys. To effect the Business Combination, Ferroglobe acquired from Grupo VM all of the issued and outstanding ordinary shares, par value €1,000 per share, of Grupo FerroAtlántica, SAU in exchange for 98,078,161 newly issued Class A Ordinary Shares, nominal value $7.50 per share, of Ferroglobe, after which FerroAtlántica became a wholly-owned subsidiary of Ferroglobe. Immediately thereafter, Gordon Merger Sub, Inc., a wholly-owned subsidiary of Ferroglobe, merged with and into Globe Specialty Metals, Inc., and each outstanding share of common stock, par value $0.0001 per share, was converted into the right to receive one newly-issued ordinary share, nominal value $7.50 per share, of Ferroglobe. After these steps, Ferroglobe issued, in total, 171,838,153 shares, out of which 98,078,161 shares were issued to Grupo VM and 73,759,992 were issued to the former Globe shareholders. Our ordinary shares are currently traded on the NASDAQ under the symbol “GSM.”

On June 22, 2016, we completed a reduction of our share capital, as a result of which the nominal value of each share was reduced from $7.50 to $0.01, with the amount of the capital reduction being credited to distributable reserves.

On November 18, 2016, our Class A Ordinary Shares were converted into ordinary shares of Ferroglobe as a result of the distribution of beneficial interest units in the Ferroglobe R&W Trust to certain Ferroglobe shareholders. Because the proceeds of the R&W Policy will not be sufficient to fully compensate for losses attributable to breaches of representations and warranties made by Grupo VM and FerroAtlántica in the Business Combination Agreement, and the proceeds under the R&W Policy are required to be distributed to the holders of the Trust Units, we may be required to use our existing cash on hand or draw under our credit facility to fund any actual loss incurred.

On August 21, 2018, we announced a share repurchase program, which provided authorization to purchase up to $20 million of our ordinary shares in the period ending December 31, 2018. On November 7, 2018, we completed the repurchase program, resulting in the acquisition of a total of 2,894,049 ordinary shares for total consideration of $20,100

thousand, including applicable stamp duty. The average price paid per share was $6.89. The share repurchase program resulted in 1,152,958 ordinary shares purchased and cancelled and 1,741,091 ordinary shares purchased into treasury, all of which remained held in treasury at December 31, 2018. See “Item 16.E.— Purchases of Equity Securities by the Issuer and Affiliated Purchasers”.

Significant milestones in our history are as follows:

Corporate and Other Information

Our operating headquarters and registered office are located at 2nd Floor West Wing, Lansdowne House, 57 Berkeley Square, London W1J 6ER, United Kingdom and 5 Fleet Place, London EC4M 7RD, United Kingdom, respectively. Our telephone number is +44 (0)203 129 2420. Our Internet address is http://www.ferroglobe.com. The information on our website is not a part of this document. The SEC maintains an Internet site that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC at http://www.sec.gov.

B.    Business Overview

We are a global leader in the growing silicon and specialty metals industry with an expansive geographical reach, established through Globe’s predominantly North American-centered footprint and FerroAtlántica’s predominantly European-centered footprint.

Ferroglobe is one of the world’s largest producers of silicon metal, silicon-based alloys and manganese-based alloys. Additionally, Ferroglobe currently has quartz mining activities in Spain, the United States, Canada, South Africa and Mauritania, low-ash metallurgical quality coal mining activities in the United States, and interests in hydroelectric power in Spain and France. Ferroglobe controls a meaningful portion of most of its raw materials and captures, recycles and sells most of the by-products generated in its production processes.

We sell our products to a diverse base of customers worldwide, in a varied range of industries. These industries include aluminum, silicone compounds used in the chemical industry, ductile iron, automotive parts, photovoltaic (solar) cells, electronic semiconductors and steel, all of which are key elements in the manufacturing of a wide range of industrial and consumer products.

We are able to supply our customers with the broadest range of specialty metals and alloys in the industry from our production centers in North America, Europe, South America, Africa and Asia. Our broad manufacturing platform and flexible capabilities allow us to optimize production and focus on products that enhance profitability, including the production of customized solutions and high purity metals to meet specific customer requirements. We also benefit from low operating costs, resulting from our ownership of sources of critical raw materials and the flexibility derived from our ability to alternate production at certain of our furnaces between silicon metal and silicon base alloy products.

Industry and Market Data

The statements and other information contained below regarding Ferroglobe’s competitive position and market share are based on the reports periodically published by leading metals industry consultants and leading metals industry publications and information centers, as well as on the estimates of Ferroglobe’s management.

Competitive Strengths and Strategy of Ferroglobe

Competitive Strengths

Leading market positions in silicon metal, silicon‑based alloys and manganese‑based alloys

We are a leading global producer in our core products based on merchant production capacity and hold the leading market share in a majority of our products. Specifically, in the case of silicon metal, with maximum global production capacity of 416,750 metric tons (which includes 51% of our attributable joint venture capacity and considers the most favorable production mix), we have approximately 78% of the merchant production capacity market share in North America and approximately 30% of the global market share (all of the world excluding China), according to management estimates for our industry. In the case of manganese-based alloy, following the acquisition of the Dunkirk and Mo i Rana plants in 2018, our market share is approximately 30% in Europe, and we are among the three largest global producers of manganese alloys excluding China.

Our scale and global presence across five continents allows us to offer a wide range of products to serve a variety of end‑markets, including those which we consider to be dynamic, such as the solar, automotive, consumer electronic products, semiconductors, construction and energy industries. As a result of our market leadership and breadth of products, we possess critical insight into market demand allowing for more efficient use of our resources and operating capacity. Our ability to supply critical sources of high-quality raw materials from within our Company provides us with operational and financial stability and reduces the need for us to compete with our competitors for supply. We believe this also provides a competitive advantage, allowing us to deliver an enhanced product offering with consistent quality on a cost‑efficient basis to our customers.

Global production footprint and reach

Our diversified production base consists of production facilities across North America, Europe, South America, South Africa and Asia. We have the capability to produce our core products at multiple facilities, providing a competitive advantage when reacting to changing global demand trends and customer requirements. Furthermore, this broad base ensures reliability to our customers that value timely delivery and consistent product quality. Our diverse production base also enables us to optimize our production plans and shift production to the lowest cost facilities. Most of our production facilities are located close to sources of principal raw materials, key customers or major transport hubs to facilitate delivery of raw materials and distribution of finished products. This enables us to service our customers globally, while optimizing our working capital, as well as enabling our customers to optimize their inventory levels.

Diverse base of high-quality customers across growing industries

We sell our products to customers in over 30 countries, with our largest customer concentration in North America and in Europe. Our products are used in end products spanning a broad range of industries, including solar, personal care and healthcare products, automobile parts, carbon and stainless steel, water pipe, solar, semiconductor, oil and gas, infrastructure and construction. Although some of these end‑markets have growth drivers similar to our own, others are less correlated and offer the benefits of diversification. This wide range of products, customers and end‑markets provides significant diversity and stability to our business.

Many of our customers, we believe, are leaders in their end‑markets and fields. We have built long‑lasting relationships with customers based on the breadth and quality of our product offerings and our ability to produce products that meet specific customer requirements. The average length of our relationships with our top 30 customers exceeds ten years and,

in some cases, such relationships go back as far as 30 years. For the year ended December 31, 2018 and December 31, 2017, Ferroglobe’s ten largest customers accounted for approximately 33% and 47%, respectively, of Ferroglobe’s consolidated revenue. Our customer relationships provide us with stability and visibility into our future volumes and earnings, though we are not reliant on any individual customer or end-market. Our customer relationships, together with our diversified product portfolio, provide us with opportunities to cross sell new products; for example, by offering silicon-based or manganese-based alloys to existing steelmaking customers.

Flexible and low-cost structure

We believe we have an efficient cost structure, enhanced over time by vertical integration through strategic acquisitions and as a result of the Business Combination in December 2015. The largest components of our cost base are raw materials and power. Our relatively low operating costs are primarily a result of our ownership of, and proximity to, sources of raw materials, our access to attractively priced power supplies and skilled labor and our efficient production processes.

We believe our vertically integrated business model and ownership of sources of raw materials provides us with a cost advantage over our competitors. Moreover, such ownership and the fact that we are not reliant on any single supplier for the remainder of our raw materials needs generally ensures stable, long term supply of raw materials for our production processes, thereby enhancing operational and financial stability. Transportation costs can be significant in our business; our proximity to sources of raw materials and customers improves logistics and represents another cost advantage. The proximity of our facilities to our customers also allows us to provide just in time delivery of finished goods and reduces the need to store excess inventory, resulting in more efficient use of working capital. Additionally, we believe we have competitive power supply contracts in place that provide us with reliable, long term access to power at reasonable rates. We capture, recycle and sell most of the by-products generated in our production processes, which further reduces our costs.

We operate with a largely variable cost of production and our diversified production base allows us to shift our production and distribution between facilities and products in response to changes in market conditions over time. Additionally, the diversity of our currency and commodity exposures provides, to a degree, a natural hedge against foreign exchange and raw materials pricing volatility. Our production costs are mostly dependent on local factors while our product prices are influenced more  by global factors. Depreciation of local, functional currencies relative to the U.S. Dollar, when it occurs, reduces the costs of our operations, offering an increased competitive edge in the international market.

We believe our scale and global presence enables us to sustain our operations throughout periods of economic downturn, volatile commodity prices and demand fluctuations.

Stable supply of critical, high quality raw materials

In order to ensure reliable supplies of high-quality raw materials for the production of our metallurgical products, we have invested in strategic acquisitions of sources that supply a meaningful portion of the inputs our manufacturing operations consume. Specifically, we own and operate specialty, low ash, metallurgical quality coal mines in the United States, high purity quartz quarries in the United States, Canada, Spain, South Africa and Mauritania, charcoal production units in South Africa, and our Yonvey production facility for carbon electrodes in Ningxia, China. For raw materials needs our subsidiaries cannot meet, we have qualified multiple suppliers in each operating region for each raw material, helping to ensure reliable access to high quality raw materials.

Efficient and environmentally friendly by‑product usage

We utilize or sell most of the by-products of our manufacturing process, which reduces cost and the environmental impact of our operations. We have developed markets for the by-products generated by our production processes and have transformed our manufacturing operations so that little solid waste disposal is required. By-products not recycled in the manufacturing process are generally sold to companies, which process them for use in a variety of other applications. These materials include: silica fume (also known as microsilica), used as a concrete additive, refractory material and oil

well conditioner; fines - the fine material resulting from crushing lumps; and dross, which results from the purification process during smelting.

Pioneer in innovation with focus on technological advances and development of next generation products

Our talented workforce has historically developed proprietary technological capabilities and next generation products in‑house, which we believe give us a competitive advantage. In addition to a dedicated R&D division, we have cooperation agreements in place with various universities and research institutes in Spain, France and other countries around the world. Our R&D achievements include:

Experienced management team in the metals and mining industry

We have a seasoned and experienced management team with extensive knowledge of the global metals and mining industry, operational and financial expertise and a track record of developing and managing large‑scale operations. Our management team is committed to responding quickly and effectively to macroeconomic and industry developments, to identifying and delivering growth opportunities and to improving our performance by way of a continuous focus on operational cost control and a disciplined, value‑based approach to capital allocation. Our management team is complemented by a skilled operating team with solid technical knowledge of production processes and strong relationships with key customers.

Business Strategy

Maintain and leverage industry leading position in core businesses and pursue long-term growth

We intend to maintain and leverage our position as a leading global producer of silicon metal and one of the leading global producers of ferroalloys based on production capacity. We believe we will achieve our goals through developing our existing strengths and pursuing long-term growth. We plan to achieve organic growth by continually expanding and enhancing our production capabilities as well as by developing new products to further diversify our portfolio of products and expand our customer base. We intend to focus our production and sales efforts on high‑margin products and end‑markets that we consider to have the highest potential for profitability and growth, such as the solar industry. We will continue to capitalize on our global reach and the diversity of our production base to adapt to changes in market demands,

shifting our production and distribution across facilities and between different products as necessary in order to remain competitive and maximize profitability. We aim to obtain further direct control of key raw materials to secure our long-term access to scarce reserves, which we believe will allow us to continue delivering enhanced products while maintaining our low‑cost position. Additionally, we will continue regularly to review our customer contracts in an effort to improve their terms and to optimize the balance between selling under long-term agreements and retaining some exposure to spot markets. We intend to maintain pricing that appropriately reflects the value of our products and our level of customer service and, in light of commodity prices and demand fluctuations, may decide to move away from contracts with index‑based prices in favor of contracts with fixed prices, particularly at prices which ensure a profit throughout the cycle.

Maintain low cost position while controlling inputs

We believe we have an efficient cost structure and, going forward, we will seek to further reduce costs and improve operational efficiency through a number of initiatives. We plan to focus on controlling the cost of our raw materials through our captive sources and long-term supply contracts and on lowering our fixed costs in order to reduce the unit costs of our silicon metal and ferroalloy production. We aim to improve our internal processes and further integrate our FerroAtlántica and Globe divisions in order to realize additional operating synergies from the Business Combination, such as benefits from value chain optimization, including enhancements in raw materials procurement and materials management; adoption of best practices and technical and operational know how across our platform; reduced freight costs from improved logistics as well as savings through the standardization of monitoring and reporting procedures, technology, systems and controls. We intend to enhance our production process through R&D and targeted capital expenditure and leverage our geographic footprint to shift production to the most cost effective and appropriate facilities and regions for such products. We will continue to regularly review our power supply contracts with a view to improving their terms, such as the inclusion of interruptibility capacity, which provides us with additional profitability, and more competitive tariff structures. In addition, we will seek to maximize the value derived from the utilization and sale of by-products generated in our production processes.

Continue to focus on innovation to develop next generation products

We believe we differentiate ourselves from our competitors on the basis of our technical expertise and innovation, which allow us to deliver new high-quality products to meet our customers’ needs. We intend to keep using these capabilities in the future to retain existing customers and cultivate new business. We plan to leverage the expertise of our dedicated team of specialists to advance and to develop next generation products and technologies that fuel organic growth. In particular, we intend develop high value powders for high end applications, including silicon-based anodic materials for Li-ion batteries. We also aim to further develop our specialized foundry products, such as value‑added inoculants and customized nodularizers, which are used in the production of iron to improve its tensile strength, ductility and impact properties, and to refine the homogeneity of the cast iron structure.

Maintain financial discipline to facilitate ongoing operations and support growth

We believe maintaining financial discipline will provide us with the ability to manage the volatility in our business resulting from changes in commodity prices and demand fluctuations. We intend to preserve a strong and conservative balance sheet, with sufficient liquidity and financial flexibility to facilitate all of our ongoing operations, to support organic and strategic growth and to finance prudent capital expenditure programs aimed at placing us in a better position to generate increased revenues and cash flows by delivering a more comprehensive product mix and optimized production in response to market circumstances. We plan to become even more efficient in our working capital management through various initiatives aimed at optimizing inventory levels and accounts receivables. We will also seek to repay indebtedness from free cash flow and retain low leverage for maximum free cash flow generation.

Pursue strategic opportunities

We have a proven track record of disciplined acquisitions of complementary businesses and successfully integrating them into existing operations while retaining a targeted approach through appropriate asset divestitures. Our past acquisitions have increased the vertical integration of our activities, allowing us to deliver an enhanced product offering on a

cost‑efficient basis. We regularly consider and evaluate strategic opportunities for our business and will continue to do so in the future with the objective of expanding our capabilities and leveraging our products and operations. In particular, we intend to pursue complementary acquisitions and other investments at appropriate valuations for the purpose of increasing our capacity, increasing our access to raw materials and other inputs, further refining existing products, broadening our product portfolio and entering new markets. We will consider such strategic opportunities in a disciplined fashion while maintaining a conservative leverage position and strong balance sheet.

We will also seek to evaluate our core business strategy on an ongoing basis and may divest certain non‑core and lower margin businesses to improve our financial and operational results.

Facilities and Production Capacity

The following chart shows, as of December 31, 2018, the location of our assets and our production capacity, including 51% of the capacity of our joint ventures, by geography, of silicon, silicon-based alloys and manganese-based alloys.  It is important to note that production capacity is calculated for the production mix as of December 31, 2018, but certain facilities may from time to time switch among different families of products (for instance, from silicon metal to silicon-based alloys and vice-versa) or among different products within the same family (for instance from ferromanganese to silicomanganese). Such switches change the production capacity at each plant.

Our production facilities are strategically spread worldwide. We operate quartz mines located in Spain, South Africa, Canada, the United States and Mauritania and charcoal production in South Africa. Additionally, we operate low‑ash, metallurgical quality coal mines in the United States.

From time to time, in response to market conditions and to manage operating expenses, facilities are fully or partially idled. As of December 31, 2018, facilities in the United States, Spain, Venezuela, South Africa and China are partially or fully idled, as a result of current market conditions.

Ferroglobe’s total installed power capacity in Spain is 167 megawatts. In 2018, total power production was approximately 491,000 megawatt hours due to very high precipitation levels.  These figures are excluding the 18.9 megawatts of hydro production capacity that were divested for net cash proceeds of $20,533 thousand in December 2018. Also, Ferroglobe owns a total of 19.2 megawatts of hydro production capacity in France. 

Products

For the years ended December 31, 2018, 2017 and 2016, Ferroglobe’s consolidated sales by product were as follows:

Silicon metal

Ferroglobe is a leading global silicon metal producer with a total production capacity of approximately 300,750 tons (including 51% of the joint venture capacity attributable to us) per annum in several facilities in the United States, France, South Africa, Canada and Spain. This production capacity reflects the production mix that was current as of December 31, 2018, but different production configurations can result in silicon metal production capacity of up to 416,750 tons per annum. For the years ended December 31, 2018, 2017 and 2016, Ferroglobe’s revenues generated by silicon metal sales accounted for 41.0%, 42.5% and 47.7%, respectively, of Ferroglobe’s total consolidated revenues.

Silicon metal is used by primary and secondary aluminum producers, who require silicon metal with certain requirements to produce aluminum alloys. For the year ended December 31, 2018, sales to aluminum producers represented approximately 47% of silicon metal revenues. The addition of silicon metal reduces shrinkage and the hot cracking tendencies of cast aluminum and improves the castability, hardness, corrosion resistance, tensile strength, wear resistance and weldability of the aluminum end products. Aluminum is used to manufacture a variety of automotive components, including engine pistons, housings, and cast aluminum wheels and trim, as well as high tension electrical wire, aircraft parts, beverage containers and other products which require aluminum properties.

Silicon metal is also used by several major silicone chemical producers. For the year ended December 31, 2018 sales to chemical producers represented approximately 43% of silicon metal revenues. Silicone chemicals are used in a broad range of applications, including personal care items, construction‑related products, health care products and electronics. In construction and equipment applications, silicone chemicals promote adhesion, act as a sealer and have insulating properties. In personal care and health care products, silicone chemicals add a smooth texture, protect against ultraviolet rays and provide moisturizing and cleansing properties. Silicon metal is an essential component of the manufacture of silicone chemicals, accounting for approximately 20% of the cost of production.

In addition, silicon metal is the core material needed for the production of polysilicon, which is most widely used to manufacture solar cells and semiconductors. For the year ended December 31, 2018 sales to polysilicon producers represented approximately 10% of silicon metal revenues. Producers of polysilicon employ processes to further purify the silicon metal and grow ingots from which wafers are cut. These wafers are the base material to produce solar cells, to convert sunlight to electricity.  Individual solar cells are soldered together to make solar modules.

Manganese‑based alloys

Ferroglobe is among the leading global manganese‑based alloys producers based on production capacity. As of December 31, 2018, Ferroglobe maintained approximately 309,000 tons of annual silicomanganese production capacity and approximately 346,000 tons of annual ferromanganese production capacity in our factories in Spain, Norway, and France. The acquisition of Glencore assets completed on February 1, 2018 added approximately 125,000 tons of silicomanganese and 144,000 tons of ferromanganese annually. During the year ended December 31, 2018, Ferroglobe sold 424,358 tons of manganese-based alloys, which includes only approximately nine months of sales activity for the newly acquired facilities in Norway and France since finished goods were not purchased as part of the acquisition.  For the years ended December 31, 2018, 2017, and 2016, Ferroglobe’s revenues generated by manganese-based alloys sales accounted for 23.2%, 20.9% and 14.2%, respectively, of Ferroglobe’s total consolidated revenues.

Over 90% of the global manganese-based alloys produced are used in steel production, and all steelmakers use manganese and manganese alloys in their production processes.

Silicomanganese is used as deoxidizing agent in the steel manufacturing process. Silicomanganese is also produced in the form of refined silicomanganese, or silicomanganese AF, and super‑refined silicomanganese, or silicomanganese LC.

Ferromanganese is used as a deoxidizing, desulphurizing and degassing agent in steel to remove nitrogen and other harmful elements that are present in steel in the initial smelting process, and to improve the mechanical properties, hardenability and resistance to abrasion of steel. The three types of ferromanganese that Ferroglobe produces are:

Silicon‑based alloys

Ferrosilicon

Ferroglobe is among the leading global ferrosilicon producers based on production output in recent years. During the year ended December 31, 2018, Ferroglobe sold 205,246 tons of ferrosilicon. For the years ended December 31, 2018, 2017 and 2016, Ferroglobe’s revenues generated by ferrosilicon sales accounted for 15.8%, 15.3% and 15.4%, respectively, of Ferroglobe’s total consolidated revenues.

Ferrosilicon is an alloy of iron and silicon (normally approximately 75% silicon). Ferrosilicon products are used to produce stainless steel, carbon steel, and various other steel alloys and to manufacture electrodes and, to a lesser extent, in the production of aluminum. Approximately 88% of ferrosilicon produced is used in steel production.

Ferrosilicon is generally used to remove oxygen from the steel and as alloying element to improve the quality and strength of iron and steel products. Silicon increases steel’s strength and wear resistance, elasticity and scale resistance, and lowers the electrical conductivity and magnetostriction of steel.

Other silicon‑based alloys

In addition to ferrosilicon, Ferroglobe produces various different silicon‑based alloys, including calcium silicon and foundry products, which comprise inoculants and nodularizers. Ferroglobe produces more than 20 specialized varieties of foundry products, several of which are custom made for its customers. Demand for these specialty metals is increasing and, as such, they are becoming more important components of Ferroglobe’s product offering. During the year ended December 31, 2018, Ferroglobe sold 106,457 tons of silicon-based alloys (excluding ferrosilicon). For the years ended December 31, 2018, 2017 and 2016, Ferroglobe’s revenues generated by silicon-based alloys (excluding ferrosilicon) accounted for 9.5%, 10.8% and 11.0%, respectively, of Ferroglobe’s total consolidated revenues.

The primary use for calcium silicon is the deoxidation and desulfurization of liquid steel. In addition, calcium silicon is used to control the shape, size and distribution of oxide and sulfide inclusions, improving fluidity, ductility, and the transverse mechanical and impact properties of the final product. Calcium silicon is also used in the production of coatings for cast iron pipes, in the welding process of powder metal and in pyrotechnics.

The foundry products that Ferroglobe manufactures include nodularizers and inoculants, which are used in the production of iron to improve its tensile strength, ductility and impact properties, and to refine the homogeneity of the cast iron structure.

Silica fume

For the years ended December 31, 2018, 2017 and 2016, Ferroglobe’s revenues generated by silica fume sales accounted for 1.6%, 2.1% and 2.4%, respectively, of Ferroglobe’s total consolidated sales.

Silica fume is a by-product of the electrometallurgical process of silicon metal and ferrosilicon. This dust-like material, collected through Ferroglobe factories’ air filtration systems, is mainly used in the production of high-performance concrete and mortar. The controlled addition of silica fumes to these products results in increased durability, improving their impermeability from external agents, such as water. These types of concrete and mortar are used in large-scale projects such as bridges, viaducts, ports, skyscrapers and offshore platforms.

Services

Energy

Ferroglobe’s total installed power capacity in Spain is 167 megawatts. In 2018, total power production was approximately 491,000 megawatt hours due to very high precipitation levels.  For the years ended December 31, 2018, 2017 and 2016, Ferroglobe recognized a profit/(loss) as a result of the Spanish hydroelectric operations, in the amounts of $14,608 thousand, ($1,229) thousand and ($3,065) thousand, respectively.

Hydroelectric power stations produce energy from the flow of water through channels or pipes to a turbine, causing the shaft of the turbine to rotate. An alternator or generator, which is connected to the rotating shaft of the turbine, converts the motion of the shaft into electrical energy.

In Spain, Ferroglobe sells all of the power it produces in the wholesale energy market that has been in place in Spain since 1998. Prior to 2013, Ferroglobe benefitted from a feed-in tariff support scheme, pursuant to which Ferroglobe was legally

entitled to feed its electric production into the Spanish grid in exchange for a fixed applicable feed-in-tariff over a fixed period, and therefore received a higher price than the market price. However, the new regulatory regime introduced in Spain in 2013 eliminated the availability of the feed‑in tariff support scheme for most of Ferroglobe’s facilities. Ferroglobe has been able to partly mitigate this reduction in prices through the optimization of its power generation such that it operates in peak‑price hours, as well as through participation in the “ancillary services” markets whereby Ferroglobe agrees to generate power as needed to balance the supply and demand of energy in the markets in which it operates. See “—Regulatory Matters—Energy and electricity generation” below.

Villar Mir Energía, S.L. (“VM Energía”), a Spanish company controlled by Grupo VM, advises in the day-to-day operations of Ferroglobe’s hydroelectric facilities in the Spanish wholesale market under a strategic advisory services contract. Operating in the Spanish wholesale market requires specialized trading skills that VM Energía can provide because of the broad base of both generating facilities and customers that it manages. For more information on the contractual arrangements between Ferroglobe and VM Energía, see “Item 7.B.—Major Shareholders and Related Party Transactions—Related Party Transactions” below.

Ferroglobe also owns and operates 19.2 megawatts of hydroelectric power capacity in two plants in France. Given the small size of these operations and the specifics of the regulatory regime under which they operate, the results of operations and financial position with respect to these plants are included within our French operations.

Raw Materials, Logistics and Power Supply

The largest components of Ferroglobe’s cost base are raw materials and power used for smelting at our facilities. In the year ended December 31, 2018, Ferroglobe’s power consumption, represented approximately 28% of Ferroglobe’s total consolidated cost of sales.

The primary raw materials Ferroglobe uses to produce its electrometallurgy products are carbon reductants (primarily coal, but also charcoal, metallurgical and petroleum coke, anthracite and wood) and minerals (manganese ore and quartz). Other raw materials used to produce Ferroglobe’s electrometallurgy products include electrodes (consisting of graphite and carbon electrodes and electrode paste), slags and limestone, as well as certain specialty additive metals. Ferroglobe procures coal, manganese ore, quartz, petroleum and metallurgical coke, electrodes and most additive metals centrally under the responsibility of the corporate purchasing department. Some locally sourced raw materials are purchased at a decentralized level (country specific purchasers) under close cooperation with the corporate purchasing department. 

Manganese ore

The global supply of manganese ore comprises standard- to high-grade manganese ore, with 35% to 56% manganese content, and low-grade manganese ore, with lower manganese content. Manganese ore production comes mainly from eight countries: South Africa, Australia, China, Gabon, Brazil, Ukraine, India and Ghana. However, the production of high-grade manganese ore is concentrated in Australia, Gabon, South Africa and Brazil.

The vast majority of the manganese ore Ferroglobe purchased in 2018 came from suppliers located in South Africa (52% of total purchases) and Gabon (45% of total purchases). In 2018, the plants of Dunkirk and Mo i Rana were integrated, resulting in the purchase of different grades of ore (mainly medium and high-grade fines). In 2018, Ferroglobe started its marketing cooperation with Glencore International A.G. for sourcing manganese ore in the international markets. In 2018, Ferroglobe has contractual arrangements with two main suppliers (located in South Africa and Gabon), expressed in U.S. Dollars, which depend primarily on spot prices.

Global manganese ore prices are mainly driven by manganese demand from China and to a lower extent from India. Potential disruption of supply from South Africa, Australia, Brazil or Gabon due to logistical, labor or other reasons may have an impact on the availability and the pricing of manganese ore.

Coal

Coal is the major carbon reductant in silicon and silicon alloys production. Only washed and screened coal with ash content below 10% and with specific physical properties may be used for production of silicon alloys. Colombia and the United States are the best source for the required type of coal and the vast majority of the silicon alloys industry, including Ferroglobe, is dependent on supply from these two countries.

Approximately 61% of the coal Ferroglobe purchased externally in 2018 for its facilities was sourced from one mining supplier in Colombia while the remaining 39% came from the United States, other Colombian mines, as well as from Poland and South Africa. Ferroglobe has a long‑standing relationship with the coal washing plants that process Colombian coal in Europe, which price coal using spot, quarterly, semi‑annual or annual contracts, based on market outlook. European coal prices, which are denominated in U.S. Dollars, are mainly based on API 2, the benchmark price reference for coal imported into northwest Europe. Prices reflect also currency fluctuation, labor issues and transportation situation in Colombia and South Africa, as well as sea-freights.

Ferroglobe also owns Alden Resources LLC (“Alden”) in the United States. Alden provides a stable and long‑term supply of low ash metallurgical grade coal by fulfilling a substantial portion of our requirements to our North American operations.

See “—Mining Operations” below for further information.

Quartz

Quartz is required to manufacture silicon‑based alloys and silicon metal.

Ferroglobe has secured access to quartz from its quartz mines in Spain, South Africa, the United States, Mauritania and Canada (see “—Mining Operations”). For the year ended December 31, 2018 approximately 70% of Ferroglobe’s total consumption of quartz was self-supplied. Ferroglobe purchases quartz from third-party suppliers on the basis of contractual arrangements with terms of up to four years. Ferroglobe’s quartz suppliers typically have operations in the same countries where Ferroglobe factories are located, or in close proximity, which minimizes logistical costs.

Ferroglobe controls quartzite mining operations located in Alabama, United States and a concession to mine quartzite in Saint-Urbain, Québec, Canada (operated by a third-party miner). These mines supply our North American operations with a substantial portion of their requirements for quartz.

Other raw materials

Wood is needed for the production of silicon metal and silicon-based alloys. It is used directly in furnaces as woodchips or cut to produce charcoal, which is the major source of carbon reductant for Ferroglobe’s plants in South Africa. In South Africa, charcoal is a less expensive substitute for imported coal and provides desirable qualities to the silicon-based alloys it is used to produce.

In the other countries where Ferroglobe operates, Ferroglobe purchases wood chips locally or logs for on‑site wood chipping operations from a variety of suppliers.

In 2018, the sourcing of metallurgical coke doubled, due to the consumption needs of the Dunkirk and Mo i Rana plants. The sourcing of the metallurgical coke was predominantly from Russia and Spain, with smaller quantities being sourced from Poland, Colombia and China.

Petroleum coke, electrode related products, slag, limestone and additive metals are other relevant raw materials Ferroglobe utilizes to manufacture its electrometallurgy products. Procurement of these raw materials is either managed centrally or with each country’s raw materials procurement manager or plant manager and the materials purchased at spot prices or under contracts of a year or less.

In 2018, graphite electrodes decreased as a result of lower production volumes and the conversion of furnaces to carbon electrodes in France. The sourcing of graphite electrodes is diversified with supply from Europe, India, Russia and China. Agreements with suppliers range from six months to several years, ensuring the reliability of supply at adequate market prices.

Logistics

Logistical operations are managed centrally and at the local level. Sea‑freight operations are centralized at the corporate level, while rail logistics is centralized at the country level. Vehicle transport is managed at the plant level with centralized coordination in multi‑site countries. Contractual commitments in respect of transportation and logistics match, to the extent possible, Ferroglobe’s contracts for raw materials and customer contracts.

Power

In Spain, Ferroglobe mainly acquires energy at the spot price through daily auction processes and is, therefore, exposed to market price volatility. Ferroglobe seeks to reduce its energy costs by stopping production at its factories during times of peak power prices and operating its factories in the hours of the day with lower energy prices. Additionally, Ferroglobe receives a rebate on a portion of its energy costs in Spain and France in exchange for an agreement to interrupt production, and thus power usage, upon request by the grid operator.

In France, FerroPem, S.A.S. has traditionally had access to relatively low power prices, as it benefited from Electricité de France’s green tariff (“Tarif Vert”), and a discount thereon. The green tariffs expired at the end of 2015 and Ferroglobe has negotiated supply contracts based on market prices with two suppliers for years 2016 to 2019 and is currently negotiating long-term supply contracts with suppliers in the market place. Regulation enacted in 2016 enables FerroPem SAS to benefit from reduced tariffs resulting from its agreeing interrupt production and respond to surges in demand, as well as paying compensation for indirect CO₂ costs under the EU Emission Trading System (ETS) regulation. Furthermore, the new arrangements allow FerroPem, S.A.S. to operate competitively on a 12‑month basis, avoiding the need to stop for two months in each year as required under the Tarif Vert.

Ferroglobe’s production of energy in Spain and France through its hydroelectric power plants partially mitigates its exposure to increases in power prices in these two countries, as an increase in energy prices has a positive impact on Ferroglobe revenues from electricity generation.

In the United States, we attempt to enter into long‑term electric supply contracts that value our ability to interrupt load to achieve reasonable rates. Our power supply contracts have, in the past, resulted in stable price structures. In West Virginia, we have a contract with Brookfield Renewable Power to provide, on average, 45% of our power needs, from a dedicated hydroelectric facility, through December 2021 at a fixed rate. Our power needs for the non-hydroelectric component of West Virginia, Ohio, and Alabama are primarily sourced through special contracts that provide competitive rates whereas a portion of the power is also priced at market rates.  At our Niagara Falls, New York plant, we have been granted a public sector package including 18.4 megawatts of hydro power through December 2021.

In South Africa, energy prices are regulated by the NERSA and price increases are publicly announced in advance.

The level of power consumption of our submerged electric arc furnaces is highly dependent on which products are being produced and typically fall in the following ranges: (i) manganese‑based alloys require between 2.0 and 3.8 megawatt hours to produce one ton of product, (ii) silicon‑based alloys require between 3.5 and 8 megawatt hours to produce one ton of product and (iii) silicon metal requires approximately 12 megawatt hours to produce one ton of product. Accordingly, consistent access to low cost, reliable sources of electricity is essential to our business.

Mining Operations

Reserves

Reserves are defined by SEC Industry Guide 7 as the part of a mineral deposit that could be economically and legally extracted or produced at the time of the reserve determination. Proven, or measured, reserves are reserves for which (a) quantity is computed from dimensions revealed in outcrops, trenches, workings or drill holes, and grade and/or quality are computed from the results of detailed sampling and (b) the sites for inspection, sampling and measurement are spaced so closely and the geologic character is so well defined that size, shape, depth and mineral content of reserves are well‑established. Probable, or indicated, reserves are reserves for which quantity and grade and/or quality are computed from information similar to that used for proven reserves, but the sites for inspection, sampling, and measurement are farther apart or are otherwise less adequately spaced. The degree of assurance for probable reserves, although lower than that for proven reserves, is high enough to assume continuity between points of observation. Reserve estimates were made by independent third-party consultants, based primarily on dimensions revealed in outcrops, trenches, detailed sampling and drilling studies performed. These estimates are reviewed and reassessed from time to time. Reserve estimates are based on various assumptions, and any material changes in these assumptions could have a material impact on the accuracy of Ferroglobe’s reserve estimates.

The following table sets forth summary information on Ferroglobe’s mines which were in production as of December 31, 2018.